Highest Capacity Trailer Hitch that Fits 2021 Ford F-150

Question

Question:

I have a 2021 Ford F-150 that does not have a factory hitch, what is the highest capacity option that I have?

asked by: Donny

0

Expert Reply:

The highest capacity trailer hitch we have for your 2021 Ford F-150 is the Draw Tite Class IV/V part # DT35MR which is rated for 11,000 lbs total trailer weight and 1,100 lb tongue weight.

expert reply by: Jameson C

0

Answer 1

I wouldn't be concerned with the gap on the ends of your cross tube. The only thing that matters is that the 4 bolts that you use to install the #DT35MR are snug and secure. Assuming you have installed these correctly, and used the proper torque…

view full answer...

Answer 2

For a similar Curt hitch that is designed for the 2015 Ford F-150 models that do have the factory hitch you would want the part #C26HR which is a confirmed fit. It has a towing capacity of 10k total trailer weight and 1,000 lbs tongue weight when not…

view full answer...

Answer 3

The Draw-Tite 41954 Class V hitch which we offer as part #DT35MR is designed for 2015 - 2022 Ford F-150 models that aren't equipped with a factory hitch. I've made up a diagram showing the dimensions and hole spacing for you.

view full answer...

Answer 4

To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where the ball and the…

view full answer...

Answer 5

Trailer hitches are rated in two ways. The most common rating is weight carrying. This rating is for towing a trailer with a standard ball mount that transfers all of the trailer tongue weight to the towing vehicle. The second rating is weight…

view full answer...

Answer 6

As the Draw-Tite #DT35MR Class V hitch is designed to fit a 2018 Ford F-150 that did not come with a factory hitch, I will have to steer you in a different direction. With that said, the Curt Class IV Hitch #C26HR will fit trucks that came with the…

view full answer...

Answer 7

Just the hitch opening of the Curt hitch part #C26HR will hang below the rear bumper of your 2020 Ford F-150 so while it's visible it doesn't stand out. It looks very standard on the back of your truck as most similar trucks have a hitch with…

view full answer...

Answer 8

As long as your 2021 Ford F-150 with 6-1/2 foot bed does not include the factory hitch, which your picture shows that you do not, you are good to go with the American made Curt Class IV #C26HR. This will bolt directly to you frame and will offer you…

view full answer...

Answer 9

The Curt Trailer Hitch Receiver #C26HR you referenced requires you to leave your factory trailer hitch receiver installed as it is welded to the frame of your 2017 Ford F-150, and mounts below your factory trailer hitch receiver. The Curt #C26HR…

view full answer...

Answer 10

Unfortunately there is not a Class V hitch rated for over 12000 lbs towing from any of our manufacturers for your 2018 Ford F-150. The best hitch we currently offer #C26HR is rated for 12,000 lbs and 1200 lbs tongue weight when used with weight…

view full answer...

Answer 11

When choosing the best weight distribution system for your trailer you will want your total tongue weight (TTW) which is composed of the loaded ready to tow weight of the trailer by any cargo stored behind the rear axle of the tow vehicle to fall in…

view full answer...

Answer 12

Most likely you are going to need the higher rated system part #FA92-00-1200 since by the time you load up the trailer it will have a tongue weight of higher than 1,000 lbs. Also, you have to consider the weight of any cargo behind the rear axle of…

view full answer...

Highest Capacity Trailer Hitch that Fits 2021 Ford F-150

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching