Review of Air Lift Vehicle Suspension - LoadLifter 5000 Air Springs Rear Axle - AL82WQ Video

I checked with our vendors and we do have an air bag kit for the PowerBoost model 2021 Ford F-150 4WD. It is the Air Lift LoadLifter 5000 Ultimate Air Helper Springs item #AL54JQ. These have a 5,000 lbs weight capacity which will be more than…

We do have a variety of straight tongue couplers that fit with a 2-5/16" hitch ball like what you're looking for. We have standard couplers like the Demco #DM13203-95 as well as hydraulic actuator couplers like the Demco #DM8101801. I'm…

Since your 2022 Ford F-150 4WD has the PowerBoost hybrid engine the correct Air Lift Loadlifter 5000 kit is the part #AL54JQ if you want the version that has bags with internal jounce bumpers or part #AL82WQ for the version without them.

So there is just no way to add payload capacity to your 2021 Ford F-150; that number is set by Ford, and there isn't a way to increase it with any product, including the air bags that fit your F-150: - Air Lift LoadLifter 5000 Air Springs #AL82WQ…

I do have an option for you but the Firestone Ride-Rite Air Helper Springs part #F2582 are indeed incompatible with a 2021 Ford F-150 PowerBoost due to additional brackets on the frame where the air bags mount. Instead, you will need to use the Air…

We do have an option that will fit the 2023 Ford F-150 with the PowerBoost hybrid engine. What you need is the Air Lift LoadLifter 5000 Air Helper Springs #AL82WQ. These feature a bolt-on installation, come with a lifetime warranty, and are made in…

Good question as there are specific air bags needed to fit your 2022 Ford F-150 with the PowerBoost engine (please note that there are no air bags that fit if you have the optional Continuously Controlled Damping). The best option for air bags that…

The Air Lift LoadLifter 5000 Air Helper Springs part #AL82WQ are a much better option for a 2021 Ford F-150 than the Timbren Rear Suspension Enhancement System part #TFR1504E because they can be adjusted to your exact load for the best mix between…

I wouldn't be concerned with the gap on the ends of your cross tube. The only thing that matters is that the 4 bolts that you use to install the #DT35MR are snug and secure. Assuming you have installed these correctly, and used the proper torque…

Curt measures rise and drop differently. Basically, they round to the nearest whole number. We measure drop (or rise) from the top of the receiver opening to the top of the ball platform and that measurement is 2-1/4 inches for ball mount #C45290.

The biggest pro to using one valve stem to maintain air pressure in an air bag kit is that you always know that both bags will have an equal amount of pressure in them. If you have an application where equal pressure on both sides is always the norm…

Using a union tee like the part #AL21838 would be a great way to simplify inflating the bags of the Air Lift kit part #AL88396. This will allow you to inflate both bags at one time with one valve stem and will give both of the bags equal air…