Rhino-Rack Roof Rack to Fit Naked Roof on 2016 Subaru WRX

Question

Question:

Rhino RS 2500 naked roof/roof rack Will this fit on my 2016 subaru WRX?

asked by: Jim K

0

Expert Reply:

I have a similar roof rack that will work for your 2016 Subaru WRX but the Rhino-Rack RS 2500 Roof Rack for Naked Roofs RRRS143 that you referenced won't work.

Instead you'll need to use the Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR37GR which fits the Sedan model and will install in the same manner using clips and hug your door jamb.

expert reply by: Jon G

0

Answer 1

Rhino-Rack makes an excellent roof rack that attaches to the fixed mounting points on the roof of your 2015 Subaru WRX sedan. For bars I recommend #RR37GR. The aerodynamic shape helps reduce wind noise and resistance and the aluminum construction…

view full answer...

Answer 2

The M8 T-bolts in the T-Track Adapter for Thule Cargo Boxes #TH27PQ are 20mm by 27mm. The T-Track Adapter for Thule Cargo Boxes #TH27PQ is actually the replacement for the T-Track Mounting Hardware TH697600. As they have different item numbers they…

view full answer...

Answer 3

We do have an option for a flush-mounted roof rack that fits your 2018 Subaru WRX, and I recommend going with the Rhino-Rack roof rack: - Rhino-Rack ROC25 Roof Rack #RR37GR The reason I like the Rhino-Rack is because it is the best overall value for…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

I looked up the online owner's manual for your 2013 Subaru Impreza and starting on page 8-14 it states that if you have roof rails then the weight capacity of your roof is 150 lbs but if you have a roof with the moulding then your weight capacity…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 12

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Rhino-Rack Roof Rack to Fit Naked Roof on 2016 Subaru WRX

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching