Will The Replacement Orbital Pad And Bushings For Curt Q-Series Hitches Work With A M25 Hitch

Question

Question:

I have a 2017 Ram 3500 DRW and a M25 25,000 lb fifth wheel hitch. I ordered the hitch from the Ram dealership 4 years ago. I believe its a Curt but not sure. I just find a Mopar emblem. Will this kit fit the hitch?

asked by: Roy T

0

Expert Reply:

You have a Curt Q25 5th Wheel Trailer Hitch for Ram Towing Prep Package 16565 on your 2017 Ram 3500, so the Replacement Orbital Pad and Bushings for Curt Q-Series 5th Wheel Hitches # C65UR you mention will fit your hitch.

expert reply by: Bryce D

0

Answer 1

There are several parts on the Curt Q20 5th Wheel Trailer Hitch part #C16130 that need greased regularly; one zerk on each side of the head, one zerk in the center of the jaw, and the cam on the locking jaw mechanism. I have attached a photo that…

view full answer...

Answer 2

To re-configure the Touchscreen Remote #LC358601 for leveling with your Lippert Ground Control System you will just need to follow these steps outlined in the attached photo. Please just let me know if you continue to have issues and I will be happy…

view full answer...

Answer 3

It actually is just that, an antenna. I spoke with my contact at Lippert who said that some models of the Lippert Ground Control 3.0 #LC358590 are wireless. The antenna on the Control Module #LC304136 is there for those systems.

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Because the FlexAir pin boxes have a part that pivots it should not be used with the Anderson Ultimate 5th wheel connection. You can however use the Trailair equivalent which is #LC158778 for the Lippert 1621 pin boxes.

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Will The Replacement Orbital Pad And Bushings For Curt Q-Series Hitches Work With A M25 Hitch

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching