Is There a Right Hand Version Lippert RV Entry Screen Door Latch

Question

Question:

I need a right hand version of this product. Lippert RV Entry Screen Door Latch - LH Item # LC201472 Do you have a right hand like this?

asked by: Matthew Y

0

Expert Reply:

There is a right hand version of the Lippert RV Entry Screen Door Latch - LH # LC201472, it is the Replacement Screen Door Latch for Right Swinging RV Entry Doors # LC27UD.

The manufacturer recently redesigned the right hand version, that is why it looks so different, but it still works the same. I have attached a review video for you.

expert reply by: Thomas M

0

Answer 1

The mounting holes on the Lippert Components RV Entry Screen Door Latch #LC201471 (RH) and #LC201472 (LH) are 3" apart. The latch has a total length of 3-5/8" and is 1-1/8" wide.

view full answer...

Answer 2

When determining what screen door latch you would need either the right hand or left hand side you would need to look at the closed door from the inside of your RV. The latch location is the side of the door that it is mounted on. This would mean…

view full answer...

Answer 3

Since the Camco RV Adjustable Screen Door Grille #CAM43997 mounts on the inside of your screen door, it is not going to interfere with any steps mounted on the outside of your door. This screen door grille is adjustable from 20"-32" wide…

view full answer...

Answer 4

The 5th Airborne Premium 5th Wheel Air Ride King Pin with Sidewinder #5AS16K has a plate welded on the back the would hold the wear plate in place and prevent any movement. If your wear plate is able to spin then it could be because of the following…

view full answer...

Answer 5

We don't have the exact screen door handle for the 990003-01 kit, but we do have the Replacement Screen Door Latch for Left Swinging RV Entry Door #LC201472 that could work just as well. This will replace latch for your RV door that swings to the…

view full answer...

Answer 6

The Curt A-Series line is the premium version over the Q-Series line and comes with a few differences. One major difference being the jaw design for the A-Series, which overlaps itself instead of just butting up to itself like the Q-Series does. This…

view full answer...

Answer 7

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 8

The A series of Curt 5th wheel trailer hitches, such as #C16120, is the newest version and is replacing the Q series. The A series jaws overlap whereas the Q series butt up against each other more than overlap. And the bearing and shaft that the head…

view full answer...

Is There a Right Hand Version Lippert RV Entry Screen Door Latch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching