Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves

Question

Question:

Our Bristol gray valve handle disappeared. The handle is attached to a rod which extends through the frame. Please help. Thanks

asked by: Bill E

0

Expert Reply:

Thanks for the picture! I would be happy to help you find a replacement handle. I recommend the Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves item # 34490CMA1G. This replaces the handle on your cable-actuated gate valve for your gray-water tank.

expert reply by: Jerred H

0

customer pic
(click to enlarge)

Answer 1

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 2

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 3

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Answer 4

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 5

Unfortunately, there are no replacement legs available for the Lippert Power Stabilizer Jacks like #LC298707, you'll need to replace the whole assembly. It's a good idea to replace the whole unit when there is significant damage. I appreciate…

view full answer...

Answer 6

While I do have a potential solution for you, we do not carry a kit that would allow you to to use a TDE brakeaway on a Dexter LP75 actuator. TDE is no longer is business, so finding compatible parts may be near impossible. We do have a replacement…

view full answer...

Answer 7

I checked with Lippert and the correct part you need is the #LC58FR.

view full answer...

Answer 8

We do have the correct replacement for your Atwood 71119 landing gear motor, which is what is shown in your photo. The replacement part is the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor #LC141893. I have added a link to a…

view full answer...

Answer 9

It sounds like you're looking for the Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves - Black Water Tank #34490CMA1, which would have the screw to attach the handle to the shaft.

view full answer...

Answer 10

If your 2007 Winnebago Voyage has the Kwikee Level Best Hydraulic RV Leveling System then you will need the Replacement Lippert Touchpad for Kwikee Level Best Hydraulic Leveling System item #LC68UD. This is the correct replacement touchpad for Kwikee…

view full answer...

Answer 11

Your best route is to replace your entire surge brake assembly as Atwood no longer produces any parts for their brake actuators. The Titan Zinc-Plated Brake Actuator #T47457207K is going to be your best replacement available. It is specific to disc…

view full answer...