bing tracking image
Q & A Icon

Replacement Tarp for TruXedo TruXport Soft, Roll-Up Tonneau Cover # TX271101-CVR Instructions  

Question:

Does the replacement cover come with instructions on how to install it onto the frame?

0

Expert Reply:

Yes, the Replacement Tarp # TX271101-CVR for the TruXedo TruXport Soft, Roll-Up Tonneau Cover # TX271101 will come with a set of instructions for replacing the fabric.

Instructions:

1. Roll cover open and secure with safety straps. Disassemble and remove side rails and cover assembly from pickup bed.

2. Remove corner plugs from header.

3. Unfasten safety straps on new and existing covers. Remove cab end header from existing cover and install header on new cover.

4. Unroll both covers side by side, lining up cab ends of covers. Remove cab end bow from existing cover.

5. Peel backing from Velcro® Brand loop, and wrap around end of bow as shown.

6. Position cab end bow on new cover as shown. Wrap Velcro® Brand hook on cover around ends of bow, and secure. Repeat procedure

7. If end plugs are equipped with retention screws, remove retention screws. Remove corner plugs from tailgate header. Remove safety clips and control straps. Remove tailgate header from existing cover.

8. Install tailgate header over T-strip. Center header on new cover.

9. Insert safety clip/control straps into groove in tailgate header.

10. Insert tailgate corner plugs into tailgate header. Secure end plug with retention screw.

11. Secure end plugs with a Sq. Dr. #6 x 1/4” retention screws. Roll up new cover assembly with cab end header on outside of roll and secure safety straps.

12. Insert corner plugs into cab end side rails. Mark center of Velcro® Brand strip 1/2” from ends of rails. Fasten #6 x 3/8” self-drilling screws through side rails and into corner plugs and end plugs at marked points.

expert reply by:
0
Bud M

Products Referenced in This Question


Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>