Replacement Brake Assemblies for 2005 Keystone Hornet with 3500 lb AL KO Axles
Question:
Im trying to figure out which part numbers I would need for a complete brake job drums, bearings, e-brakes, etc. on my 2005 two axle Keystone Hornet. The axles are Al-Ko T35 7 or J35 7. The stamps are hard to read, but neither one cross-references. So far, Ive got the drum number, Dexter 8-247, 4-1/2 BC. They appear to be EZ lube. I am not sure where to get the e-brake part numbers. Thanks.
asked by: Mike H
Expert Reply:
The 3,500 lb Al Ko axles use standard 4 bolt mounting flange brake assemblies so you could easily use the part # AKEBRK-35-SA for a set of self adjusting brake assemblies to replace what you have now.
Then for the hub/drums you are looking for you'd want the # 8-247-50UC3-EZ and you'd be set.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: What is the Overall Width and Diameter of a 235/80R16 Size Tire
- Q&A: Replacement Hub and Brake Assemblies that Fit Sure Trac 3,500 lb Axle
- Q&A: Dexter Replacement Hub/Drum Assembly # K08-247-1G
- Q&A: Replacement 10-Inch Galvanized Drum Brakes for Boat Trailer with 14-Inch Wheels
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Pros And Cons For Switching From Electric To Electric Over hydraulic Disc Brakes On Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Q&A: Which Brakes to Fit in Dexter 8-247 Hub and Drums
- Q&A: What Info Is Needed to Pick Out Disc Brake Kit for Venture VATB 5925
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Install E-Track in 3 Easy Steps
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub