Difference Between Global Link Replacement 295-000176 And The 295-000027 Awning Rollers

Question

Question:

What is the difference between the 295-000176 and the 295-000027?

asked by: Ken D

0

Expert Reply:

The difference between the Global Link Replacement J38 Roller for RV Slide Out # 295-000027 and the Global Link Replacement Roller for RV Slide Out # 295-000176 is that # 295-000027 is a direct replacement for use on LCI in-wall slide outs, and measures 4 5/8" long, 1 3/4" wide, and 1 1/16" tall.

While the # 295-000176 is not a direct replacement for LCI in-wall slide outs, and is used as replacement for standard RV slide outs.

expert reply by: Bryce D

0

Answer 1

We have the Yates Side Guide Roller for Boat Trailers that are 9" Long with 1/2" Shaft, #YR9202-4. And the 12" Long - 5/8" Shaft Yates Side Guide Roller for Boat Trailers, #YR12243-5. For replacement parts of this…

view full answer...

Answer 2

Sounds like you are looking for the Global Link Replacement J38 Roller #295-000027. This is a replacement surface-mount J38 roller helps to ensure that your RV's slide out rolls in and out smoothly. Works with the Lippert In-Wall slide-out…

view full answer...

Answer 3

The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side, #LC84FR is the left side of the slide-out as looking at it, facing it, from the outside. The float side, #LC26VR, will of course be the right side as…

view full answer...

Answer 4

Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your…

view full answer...

Answer 5

From an application perspective the difference is that they each are for different applications. The non-composite kits (we don't carry) fit that style and the composite block kits fit if the setup uses that style. You aren't able to…

view full answer...

Answer 6

Manufacturers do not list the part numbers they use to the public so I would need to see the actual part numbers listed on the slide out motor to determine the correct replacement. I've attached a picture below of where the stickers are typically…

view full answer...

Answer 7

We have a few different slide out rollers so I've listed them below so that you can measure your current roller and see if we have a compatible match. I've separated them by surface mount and recessed mount as well. Surface Mount: Global Link…

view full answer...

Answer 8

You'll need to measure the arm (pictured below) to determine the correct size gear pack replacement for your trailer's slide outs. For 2" x 2" you'll need #LC281331 For 2.5" x 2.5" you'll need #LC123356 For 2"…

view full answer...

Answer 9

The correct replacement gear pack for your Lippert slide out will depend on the size of the arms attached to your slide out: - 2" x 3" Slide Arms: Lippert Standard Slide-Out Gear Pack #LC140409 - 2-1/2" x 2-1/2" Slide Arms:…

view full answer...

Answer 10

I called and spoke to the technician at Lippert about the gear packs. If the arms that attach to your slide out are 2 x 2 you will need Gear Pack part #LC281331. If the arms that attach to the slide out at 2.5 x 2.5 you can certainly use Gear Pack…

view full answer...

Answer 11

The correct replacement for your Klauber K01431B300 slide-out motor is the Replacement Motor Assembly for Lippert RV Slide-Outs - Klauber A-300 Model #LC157511.

view full answer...

Difference Between Global Link Replacement 295-000176 And The 295-000027 Awning Rollers

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching