Replacement 6 Diameter MaxxFan Dome Roof Vent w/ 12V Fan

Question

Question:

Hi I installed one your earlier models without a fan motor. I drove off with it open and broke the cover. I thought I could replace the broken part but you do not show it for sale anymore. Do you have one that you can sell me.

asked by: Stanley S

0

Expert Reply:

The rain shield is not an item available separately from the MaxxFan Dome Roof Vent w/ 12V Fan - 6" Diameter - Manual Lift, # MA00-03812B. I suggest upgrading to the newer model with a 12VDC fan. The great thing about this unit is that it will draw the hot air and moisture out of your RV but even when the vent is closed, it can circulate the interior air like a ceiling fan.

expert reply by: Michael R

0

Answer 1

Yes, if you'd like you would be able to mount the MaxxFan Dome roof vent on its side. I have added a photo that a customer sent in showing the same vent (in black) mounted on its side; the vent is designed to fit roofs (or walls) that are between…

view full answer...

Answer 2

Because of the dome cover design the MaxxFan Dome Roof Vent w/ 12V Fan Item #MA00-03812B can be used in any weather. The integrated rain shield prevents water and debris from entering your RV so you can run it rain or shine. The bug screen keeps…

view full answer...

Answer 3

The MaxxFan Dome Roof Vent w/ 12V Fan, #MA00-03812W is a 6" diameter fan with overall length of 9-1/16". When properly installed this fan will have a vent height of 2-15/16" when closed and when open, 3-7/8". This has all mounting…

view full answer...

Answer 4

The MaxxFan Dome Roof Vent w/ 12V Fan #MA00-03812B does not have a brushless motor.

view full answer...

Answer 5

We do offer a vent fan which can be mounted on the side of a wall, the MaxxFan Dome Roof Vent part #MA00-03812B for black or part #MA00-03812W for for white.

view full answer...

Answer 6

You could technically install the MaxxFan Deluxe Roof Vent #MA00-07500K in the roof of your mini van.That being said, the main issue is going to be the mini van's roof thickness. Since the roofs on vehicles are significantly thinner than those…

view full answer...

Answer 7

The MaxxFan Dome Roof Vent w/ 12V Fan #MA00-03812B is capable of moving 200 cubic feet of air per minute. Assuming you have a ceiling height of 8' that would exhaust all the air in a room that is 5' wide by 5' long room every minute. Or…

view full answer...

Answer 8

The MaxxFan Dome Roof Vent part #MA00-03812W will work just fine on passenger vehicle with thin metal roof as many others have done so as well. That said, you will need to add some material like plywood between the roof and fan to get the required…

view full answer...

Answer 9

Yes you could run two of the MaxxFan Dome Roof Vent w/ 12V Fan #MA00-03812B off of the same circuit to then be controlled with a single switch like #D16740.

view full answer...

Answer 10

To connect your MaxxFan Dome Roof Vent w/ 12V Fan #MA00-03812B to your Wattfun Power Pack 12v outlet you would just need some 16 gauge wire and would need to splice the wire to the fan and to a 12v male plug. To make it easy you could just cut the…

view full answer...

Answer 11

The correct replacement motor for the VD218105A is the Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans part #BVD0218-00. The numbers are not all the same nor do they need to be, the important one is the model number of the motor…

view full answer...

Answer 12

The fuse that was included with your BVD0218-00 motor is to ensure that it is up to specs for Canadian laws. If you live in the US then you can use part #BVD0218-00-R but if you live in Canada or you are wanting to use the fuse anyways then you need…

view full answer...

Replacement 6 Diameter MaxxFan Dome Roof Vent w/ 12V Fan

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching