Availability of Replacement Struts for Solera RV Awnings

Question

Question:

Hi I want to know if you have a replacement gas strut for solera awning 654150 0550N 307/15 C 15 The RV is a Keystone Hideout 308BHDS year 2015 Maybe you have the same part or a similar one?

asked by: Alfonso C

0

Expert Reply:

We have two Solera struts available for Solera awnings with the part # LC280343 for if you have a short or flat awning or the part # LC260282 for if you have a pitched arm awning. The numbers you listed aren't part numbers so I wasn't able to determine what you have based on that.

expert reply by: Jameson C

0

Answer 1

Though we don't carry that exact part, we do have a strut with the same dimensions that is likely to work. Based on my research the gas strut 654150 is 26.46" when extended, has two metal ends and is 120 lbs of force. The strut we…

view full answer...

Answer 2

For your Solera Awning, I recommend taking a look at the: -Solera Gas Strut, 124 to 144 lbs for Pitched Awning Arms #LC260282. This is a universal for manual and powered Solera awnings, measures 24" long, and has a compression force range…

view full answer...

Answer 3

We do have a couple of replacement gas struts available for Solera Awnings but I wasn't able to track down any information on your awning using the numbers you provided. What I recommend doing is measuring your existing strut to see if one of…

view full answer...

Answer 4

The correct gas strut for your powered or manual Solera awning will simply depend on which Solera awning arm assembly you have. If you have a Solera Short or Flat awning arm assembly (which will use something like the Solera Short Awning Support Arm…

view full answer...

Answer 5

Thank you for the photos and that information, and based on those photos, what you will need to do is replace the awning arm altogether. For the 69 inch wall mount, the correct part is the following: - Solera 69" Standard Flat Awning Support…

view full answer...

Answer 6

I reached out to the manufacturer who told me there isn't any type of recommended way to remove the starlock washer on the Solera Gas Strut #LC260282 but that "most people shim something behind, hit and tap it with a screwdriver to pry it…

view full answer...

Answer 7

Thank you for the photo; the individual rails are not available separately so you will need to get the Support Arm Assembly such as #LC281154 to replace your bent rail. This assembly has 69" support arms and is to be used with standard awning…

view full answer...

Answer 8

It sounds like you are looking for a new pitch arm for the Solera 69" Standard Flat Awning Support Arm part #LC281154. If that is the case then you can replace this with the Replacement Pitch Arm Assembly for Solera 69" Standard Flat Awning…

view full answer...

Answer 9

I did some checking and it appears that the gas strut #LC260282 is held to the support arms with bolts, pins, or rivets that go through the eyelets at each end, see picture. It does not appear that the strut unscrews from those eyelets. The…

view full answer...

Answer 10

When you go to install the Replacement Pitch Arm part #LC375994 you'd need to go with three of the retaining washers #LC431583.

view full answer...

Answer 11

We do have the bearings you need for your Lippert 4,400 lb trailer axle: - Inner bearing #L68149 - Outer bearing #L44649 You can also get the bearings, races and seal with one kit, the Bearing Kit #BK2-100. If you are looking for grease as well, I…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Availability of Replacement Struts for Solera RV Awnings

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching