Is Rhino-Rack BackBone System RR32MY The Same As RF2B3 For 2017 Ford F-350?

Question

Question:

I just want to confirm that the Rhino Backbone you have listed as # RR32MY is indeed the RF2B3 Rhino Rack Backbone. Thanks

asked by: Michael B

0

Expert Reply:

Yes, the Rhino-Rack Backbone System for Pioneer Platform # RR32MY is our part number for Rhino-Rack RF2B3; they are the same exact part. This system is confirmed to fit your 2017 Ford F-350 Super Duty when used with Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 60" Long x 56" Wide # RR72TB. This tray and the backbone system are also sold together in a kit as seen here: Rhino-Rack Pioneer Platform Rack with Backbone Mounting System - 60" Long x 56" Wide # RR53ZW.

expert reply by: Andrew N

0

Answer 1

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

This is a really good question. I sent it to our engineer and he told me that the gauge has a 3%,2%,3% margin of error. This means that in the first third of its range, it is +/- 3% of the actual tongue weight, the middle of its range it is +/- 2%,…

view full answer...

Answer 6

You will want the trailer to be on level ground and level (parallel) with the level ground to use the etrailer Tongue Weight Scale for Campers and Utility Trailers #e99044. You may have to go to an empty parking lot or a different street to get more…

view full answer...

Answer 7

I can certainly help you out. The TW is the tongue weight. This is the weight of the trailer at the coupler that attaches to the ball mount on the trailer hitch. It should be 10 to 15 percent of the GTW or gross trailer weight. The gross trailer…

view full answer...

Answer 8

I have a Thule solution that will work but the mounting tracks on the Thule square bars do not run anywhere near the length of the bar to allow a 60 inch bar to fit on feet that are only 33 inches apart. But Thule does have their ProBars like the…

view full answer...

Answer 9

Yes, the Thule ProBars like part #TH713600 are compatible with the Thule Gutter Feet part #TH65BJ that you asked about to complete a ProBar roof rack on your 2022 Jeep Wrangler.

view full answer...

Answer 10

The Rhino-Rack Backbone System for Pioneer Platform #RR32MY (RF2B3) is designed to only fit 2019 Ford F-250 Super Duty crew cabs with the Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 60" Long x 56" #RR72TB. The Rhino-Rack Backbone…

view full answer...

Answer 11

The support leg of the Rhino Rack Universal Load Assist #RR-RUSL extends 87-1/8 inches, or 7 feet, 3-1/8 inches. The 2016 Ford F-150 has a listed height between 75 inches and 77 inches but you will want to double check by measuring from your roof…

view full answer...

Is Rhino-Rack BackBone System RR32MY The Same As RF2B3 For 2017 Ford F-350?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching