Will the Replacement Mounting Brackets # 21-240PK Fit My 2018 Chevy Silverado 1500?

Question

Question:

Will these brackets fit a 2018 Chevy Silverado 1500 Z71 truck

asked by: Brian K

0

Expert Reply:

The Replacement Hardware # 21-240PK will only fit Westin PRO TRAXX Oval Nerf Bars # 21-24015 and # 21-24010. Unfortunately, these nerf bars are not designed to fit any 2018 Chevy Silverado 1500 models (including Z71).

With that being said, there may be replacement hardware available that are designed to fit with your 2018 Chevrolet Silverado 1500 like the Replacement Mounting Hardware for Aries 4" Wide Oval Nerf Bars # AABRKT-S224046. These brackets, even though they will fit your 2018 Chevy Silverado 1500 (double cab only), they will only work with Aries 4" Wide Nerf bars # AAS224046.

It is important to note that each nerf bar has specifically designed mounting hardware that will allow you to attach them to your truck. The only way to know for sure what hardware you need is by knowing the make/model of your particular bars. I would be happy to provide you with the correct replacement hardware if you reply to this answer with the make/model of your nerf bars.

expert reply by: Bob C

0

Answer 1

Yes! The Replacement Mounting Hardware Kit for Westin PRO TRAXX 5" Wheel-to-Wheel Oval Nerf Bars #21-53459PK is the correct replacement mounting hardware for your Westin PRO TRAXX Oval Nerf Bars #WE99FR, on your 2021 Ram 2500 Crew Cab. This…

view full answer...

Answer 2

The brackets that come with the Replacement Mounting Hardware for Aries 4" Wide Oval Nerf Bars #AABRKT-S224046 that you referenced are steel. They do come with instructions but I also attached a link to a page that has the install…

view full answer...

Answer 3

Assuming you have the Westin #21-22770 or #21-22775 ProTraxx Oval 4 Inch Nerf Bars which are a fit for the 2018 Toyota Tacoma Double Cab, you'd need the #21-2277PK replacement hardware kit.

view full answer...

Answer 4

I do have some great nerf bars options for a 2018 Chevrolet Silverado 1500 but we don't carry that brand and most bars aren't universal even with new mounting brackets. I instead recommend using the Aries Round Nerf Bars part…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 10

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 11

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Will the Replacement Mounting Brackets # 21-240PK Fit My 2018 Chevy Silverado 1500?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching