Replacement for 50 Amp Newmark RV Power Converter

Question

Question:

Can this product replace a late 90s Newmark DCV 50 F power converter? Although the old converter used 50 AMPS I doubt my houseboat power ever comes close to drawing that especially since I have upgraded the 12 v lights to LED. If this doesnt work do I need to step up to the 60 AMP model?

asked by: Joshua P

0

Expert Reply:

The Go Power RV Converter and Smart Battery Charger part # 34266168 will work well to replace a 50 Amp Newmark RV Power Converter. It's unlikely the 5 amp difference will have an impact on the system. The correct size converter is chosen based on load and the best method for selecting this is to simply choose one with either the same rating as before or as close as you can get which in this case is 45 amps.

expert reply by: Conner L

0

Replacement for 50 Amp Newmark RV Power Converter
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Since the part #PD4655V has come out and has ability to switch between lithium and lead acid batteries the part PD4655LIV was discontinued. At one point there were separate parts for lithium and lead acid batteries but since the current one can do…

view full answer...

Answer 10

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Answer 11

We offer a direct replacement for your current 45A Parallax/Magnetek 6345 Power Center. The Progressive Dynamics Replacement Converter, part #PD4645V is exactly what you'd need. I've linked to a product description video for the #PD4645V…

view full answer...

Answer 12

There is actually a carrier specifically for your application. Well, not vaulting poles, but 6 inch PVC pipe. Take a look at Conduit Carrier Kit # RP7054900. It fits 6 inch diameter PVC schedule 40 or 80 and this set up can be locked using a padlock…

view full answer...

Replacement for 50 Amp Newmark RV Power Converter

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching