Recommended Suspension Enhancement To Reduce Body Roll On A 2022 Mercedes-Benz Sprinter 3500

Question

Question:

I have a 2022 Mercedes-benz Sprinter 3500 and get a lot of side to side play when passing semi's on the highway or making turns. What do you recommend?

asked by: John D

0

Expert Reply:

For the front axle of your 2022 Mercedes-Benz Sprinter 3500 I recommend the Timbren Front Suspension Enhancement System # TMBFSP35. These Jounce-style springs will help reduce the side-to-side sway you're experiencing. These rubber springs will absorb most of the road shock, creating a smoother, more stable ride overall. Wear and tear on your suspension is also lessened because the rubber springs work to prevent bottoming out on rough roads.

For the rear axle I recommend the SumoSprings Rebel Custom Helper Springs # SS55FR (for 4WD models). These Jounce-style springs have progressive load control which means the springs compress according to the weight of your cargo. For lighter loads the springs compress easily at first for soft engagement and a less bumpy ride and for heavier loads the springs compress by as much as 80 percent for support. They work independently from each other to compensate for off-center loads and reduce body roll during sharp turns which will drastically help with your swaying issues.

If you have a 2WD model then I recommend the Timbren Rear Suspension Enhancement System # TMBRSP35A. These Jounce-style springs will provide additional support as needed so you always have a smooth, comfortable ride. They allow the leaf springs ample movement while cushioning light loads without affecting the ride quality of your sprinter when empty. As more weight is added they become more rigid to reduce sag and increase stability. These springs will also work independently to reduce body roll with off-center loads and tight turns.

expert reply by: Kevin C

0

Answer 1

For your 2022 Mercedes-Benz Sprinter 3500 I recommend the SumoSprings Rebel Custom Helper Springs - 2 Piece - Rear Axle #SS23FR. These maintenance-free microcellular urethane springs have a combined 5,000lb capacity to upgrade the rear suspension of…

view full answer...

Answer 2

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 3

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

view full answer...

Answer 4

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR which will be 3/8" shorter but that is still close…

view full answer...

Answer 8

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Answer 11

According to my contact at Fantastic Vent the correct replacement lift motor to use in your vent is part #FVK6010-81, not item FVK-6050-80. The replacement motor does operate at a higher 17-RPM speed. Since your fan is of a lower rpm and manufactured…

view full answer...

Answer 12

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Recommended Suspension Enhancement To Reduce Body Roll On A 2022 Mercedes-Benz Sprinter 3500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching