Will Lippert Solid Stance RV Step Support Kit LC96BJ Fit 2019 Winnebago Minnie Plus 26RBSS

Question

Question:

I’d like to double check that the Lippert Solid Stance RV step support will accommodate our travel trailer. We have a Winnebago Minnie Plus, 2019, 26RBSS. I pulled up all the appropriate items from the down boxes, but at check out it does not specifically mention that it’s for an RV, and only looks like a generic step support. I have included a few pictures of our steps. Thank you,

asked by: Jacki J

0

Expert Reply:

Yes the Lippert Solid Stance RV Step Support Kit # LC96BJ that you referenced does fit the steps you have on your Winnebago Minnie Plus, 2019, 26RBSS. And based on the dimensions you have from the bottom of the step to the ground it would fit in that regard as well as it has a height range of 4-3/16 inch to 14-3/8 inch.

expert reply by: Jameson C

0

Step Height from Ground
(click to enlarge)

Answer 1

It sounds to me like you're experiencing vehicle sway on your RV. To remedy this, I recommend installing a steering stabilizer like #RM82RR, and you can use the rear anti-sway bar like #RM83ZR to combat body roll. If you let me know what RV you…

view full answer...

Answer 2

Kenny, those bolts for the B&W Companion 5th Wheel Trailer Hitch #BWRVK3500-5W should be torqued to 40 ft. lbs. Also, the pivot arms would need to be torqued to 80 ft. lbs, the draw down bolt should be tighten to 60 ft.lbs and the arms should be…

view full answer...

Answer 3

The 23-5/8 inch width is the widest point and is actually for the metal rod. The bracket width is 22-1/8 inches from edge to edge. I measured this product for you to confirm and have attached a photo to assist.

view full answer...

Answer 4

Really you're going to need to measure the distance where the leveling system is going to be installed. If that distance is more than 20', then you're going to want the 6 point Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling…

view full answer...

Answer 5

We don't have an install video but what I can do is describe it. The portion of the #LC301704 with the round holes mounts to the bottom of the frame on your trailer with nuts and bolts or welding. They would need to be spaced at the width of your…

view full answer...

Answer 6

We don't have an install picture but what I can do is describe it. The portion of the #LC301704 with the round holes mounts to the bottom of the frame on your trailer with nuts and bolts or welding. They would need to be spaced at the width of…

view full answer...

Answer 7

The Lippert Solid Stance RV Step Support Kit #LC96BJ will fit Lippert double and triple manual folding steps, and in regards to how it will fit, what you will need to do is check the space you have under your double step. You will need to have at…

view full answer...

Answer 8

I don't know what type of brackets were used on your 2022 Heartland RV Torque 5th Wheel but we carry the #LC349975, which can really only be installed at one height since they have lip that butts up against the bottom of the I-Beam. If clearance…

view full answer...

Will Lippert Solid Stance RV Step Support Kit LC96BJ Fit 2019 Winnebago Minnie Plus 26RBSS

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching