Which Leaf Springs and Hangers Are Needed For 2000lb Trailer Axle e84YR?
Question:
DO YOU HAVE A KIT FOR THIS AXLE KIT, THAT HAS SPRINGS AND ETC FOR THIS AXLE??
asked by: KRISTY R
Expert Reply:
I would be happy to piece a kit together for you, but there are not any leaf spring kits designed for axles such as the Trailer Axle With Idler Hubs # e84YR you were looking at.
You will need the Single-Axle Trailer Hanger Kit # APS4 with 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles # e84SR and U-bolt kit # CE23000 to secure the axles to the leaf springs.
The hangers will get welded to the trailer frame around 20" apart from center to center of the mounting holes, and you will want to mock this up first to fine tune the kit to your specific trailer.
To find where to place the axle you will need to take a look at the included help article that goes over how to determine where to place a trailer axle.
I included videos of the products mentioned for you to take a look at.
Products Referenced in This Question
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Single Axle
- etrailer
more information >
CE Smith U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4" Long U-Bolts - Zinc
- Trailer Suspension Parts
- U-Bolt Kits
- Boat Trailer
- Snowmobile Trailer
- 2000 lbs
- Round Axle - 1-3/4 Inch
- 3/8 Inch Diameter
- 4 Inch Long
- CE Smith
more information >
3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 2000 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 20-3/8 Inch Long
- Painted
- etrailer
more information >
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Q&A: Why Is The etrailer Trailer Axle with Idler Hubs # e84YR Only Compatible With 8-12" Wheels?
- Shop: Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Search Results: trailer axles
- Search Results: trailer tires and wheels
- Search Results: trailer axle
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range D
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Search Results: wheels
- Search Results: trailer bed
- Search Results: 2000lb axle
- Search Results: dexter 2000 lb axle
- Video: Dexter Axle Trailer Axles - Leaf Spring Suspension - T20BTR-6048 Review
- Q&A: Is Socket Needed For Castle Nut on Trailer Axle e84YR
- Q&A: How to Determine Correct Replacement Axle For Easier to Grease Hub
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Video: CE Smith U-Bolt Kit for Round Trailer Axles Review
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What is The Difference Between Having Trailer Axles Above or Below the Leaf Springs
- Q&A: Does The Redline Grease Seal 13194 Have Markings Of TCM 13194 TM and a Spring On The Inside Lip
- Q&A: Is the Trailer Axle with Idler Hubs e82GR Compatible With 12" Wheels and Tires