Determining Correct Bearings for Wells Cargo Trailer

Question:

I have a 2000 Wells Cargo Enclosed trailer. I am looking for new bearings. The bearing I pulled out are totally shot and I cannot see any #s on them. Model#CW1622-102 Can you tell me what bearings go in it? Also need the dust cap or whatever the cap on the end is called.

asked by: Jim W

Expert Reply:

Since you are unable to find any part numbers on your bearings you are going to need to take measurements to find the correct size. I recommend using a digital caliper like the # PTW80157.

You will need to measure the inner and outer bearing seat on your spindle. Once you have the measurements you will be able to determine the correct bearings. For a standard grease cap you will also need to measure the inner diameter of your hub.

I have attached a helpful diagram that shows where the measurements need to be taken for your bearings. I also attached a helpful article on replacing bearings, races and seals as well as a link to our available bearings and standard grease caps.

expert reply by: Robin H