Replacement Hub Needed That Uses a Bearing With a .875" Inner Diameter
Question:
Hello. I am looking to replace my wheel hub. The outer bearing is L68149. The inner bearing however is a .875 inches. Do you carry a replacement hub for this. Thank you
asked by: Jason
Expert Reply:
The .875 inch measurement you got is an odd one. The hubs that we carry that use an # L68149 inner bearing will typically use the # L44649 outer bearing. However, this will have an inner diameter of 1.063 inches.
With that being said, you may want to double check the inside diameter and check to see if there are any numbers on the bearing. There should also be a number of the race that may help identify the bearing.
If you come up with the same size though, it may end up being something that is no longer paired with the # L68149. In this case, it will be a good idea to replace the axle with something that uses more common bearings. As an example, the Dexter Trailer Axle Beam with EZ-Lube Spindles # T3584F-EZ-8974 will use the # L68149 and # L44649 bearings and will be much easier to replace parts on. It will measure 89 inches from hub face to hub face and 74 inches from the center of one spring seat to the center of the other, so you will need to make sure to measure before replacing the axle.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hubs for Old Trailer Axle Using Timken 1380 Inner/17580 Outer Bearings
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: Grease Seal
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Replacement Trailer Hub Bearing - LM11949
- Search Results: brkh10b
- Q&A: Can Older Race in Trailer Hub Be Reused and Will Grease Seal Installed Past Flush be Okay
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Search Results: bearing buddy
- Video: etrailer Electric Trailer Brake Kit Installation
- Shop: Trailer Wiring
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Search Results: trailer brakes
- Article: Trailer Wiring Diagrams
- Shop: Suspension Enhancement
- Search Results: 25580
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: Trailer Tire Sizing
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: What is the Best Grease for Trailer Bearings
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: lug nut
- Search Results: trailer jack
- Video: Choosing the Right Trailer Wiring
on Trailer Bearings Races Seals Caps
