Actual Length of Lippert 21 Solera Rollbar

Question

Question:

What is the actual length this rollerbar

asked by: Dick

0

Expert Reply:

The actual length of the Solera Rollbar Only For 21' Awnings like part # LC338512477 is 244".

expert reply by: Conner L

0

Answer 1

The 21 ft Solera Rollbar #LC338512477 that you referenced comes with just the rollbar, no endcaps or springs or other hardware. The O.D. is 3.50 inches and the I.D. is 3.38 inches. My contact at Lippert Components said that the I.D. doesn't take…

view full answer...

Answer 2

I checked with my contact over at Lippert and he informed me that while the Solera/Lippert awning fabrics and rollers are compatible with some Dometic awnings, the #LC338512477 is not compatible with your Dometic 8500 awning. In order to use the…

view full answer...

Answer 3

The Solera Rollbar part #LC260560405 that you referenced weighs 21 lbs.

view full answer...

Answer 4

In order to choose the correct Solera Rollbar for Solera Awning you'll simply measure the distance between each arm on center. The Solera Rollbar Only For 21' White Awning part #LC338512477 for example is for a 21' awning. I have attached…

view full answer...

Answer 5

The Solera Rollbar Only For 21' White Awning, Grey Tube #LC338512477 is not compatible with your A&E awning, but you can make it work by also replacing the arms of your A&E awning with universal arms from Solera: - Black: Solera Universal…

view full answer...

Answer 6

I may have a solution for you, but without knowing exactly what type of awning this is I cannot confirm this will work. However, we do carry 2 awning end caps for Lippert/Solera awnings that I recommend checking out and seeing if they're the same…

view full answer...

Answer 7

The Replacement Endcap #LC423750 may fit your Carefree awning. You will want to measure your current end cap to ensure that they are the same diameter. This end cap has a diameter of 3-5/8" and fits onto a tube that is 3-1/2" round. You may…

view full answer...

Answer 8

Converting your Dometic power awning to the Solera Power Awning will require the Plain Drive Head, White #LC266146 and a power idler head. The Solera Power Awning Speaker Idler Head, White #LC342148 is an option that has the matching idler head…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Actual Length of Lippert 21 Solera Rollbar

Product Page this Question was Asked From

Continue Researching