Could 2021 Honda Passport Tow a Sol Horizon Rover

Question

Question:

Will the Passport be able to handle the Horizon Rover ??

asked by: Wayne K

1

Helpful Expert Reply:

At most the Sol Horizon Rover could weigh 4,000 lbs whereas I looked up the towing capacity of your 2021 Honda Passport and found that it could be rated between 3,500 and 5,000 lbs so depending on how your vehicle is equipped it could work.

You'd need a higher rated hitch like the Draw Tite part # 76290 which is mostly hidden and has more capacity than needed.

expert reply by: Jameson C

1

Answer 1

The trailer hitch options for a 2020 Honda Passport such as the Curt Trailer Hitch Receiver part #C13421 which is what I recommend do not require trimming of the bumper fascia. They also don't require drilling or welding therefore there will be…

view full answer...

Answer 2

For your 2022 Honda Passport the hitch I recommend is the Curt part #C13421 as it has great towing capacities and is mostly hidden since only hitch opening hangs below rear bumper. This allows it to be the least visible and also helps with ground…

view full answer...

Answer 3

Both the Draw-Tite #76290 and the Curt #C13421 Class III trailer hitches for your 2020 Honda Passport feature a hidden-crosstube design that keeps the main support hidden behind the bumper and leaves just the 2" receiver visible beneath it (see…

view full answer...

Answer 4

To install a Class III 2-inch hitch on your 2019 Honda Passport all you need is a hitch like the Draw Tite part #76290 which fits your vehicle and is the correct size and basic hand tools as this comes with all of the needed hardware to complete the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...