Would Rhino-Rack Universal Modular Backbone Mounting System Fit ARE CX Classic Cap

Question

Question:

Toyota Taco 2017 Sport double cab 5foot bed with A.R.E CX Classic cap. is this backbone made for The ARE CX Classic Cap? Best Regard.

asked by: Tommy M

1

Helpful Expert Reply:

Yes the Rhino-Rack Universal Modular Backbone Mounting System # RR57AT that you referenced would fit the A.R.E. Classic camper shell you have installed on your 2017 Toyota Tacoma.

expert reply by: Jameson C

1

Answer 1

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 2

The Thule Track Mount Roof Racks are all going to be limited to 165 lbs therefore this will give you a good idea of how much weight can be carried. However, the camper top manufacturer may have a lower weight capacity figure so if that is the case…

view full answer...

Answer 3

Yes, the Rhino Rack Universal Backbone Mounting System part #RR24AT is the same as the RUMB1. This is the correct kit to use to mount to your ARE camper shell so it would be what you need.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to get…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Hey Dave, The Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR would not be intertwined or interfere with the Blue Ox Patriot #BLU37TR. This wire harness is simply plugging into the motorhome and Gladiator tail lights to copy the light…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

On the Jeep Wrangler and Jeep Truck models the steering wheel does not actually lock with the ignition in the off position, it just has a loss of power steering-which is likely what you're experiencing. Jeep removed the steering wheel lock from…

view full answer...

Answer 10

There is a great option for a tire pressure monitoring system on your 35' travel trailer, although the TireMinder TPMS for Dual Axle Trailers #TPMS-TRAILER is only designed to work on trailers that are up to 25' in length and would not be the…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

While we don't currently offer the EB01-155 or EB01-150 we do offer the Dexter Electric Brake Kit #23-450-451, which has matching dimensions, capacity, and are self-adjusting.

view full answer...

Would Rhino-Rack Universal Modular Backbone Mounting System Fit ARE CX Classic Cap

Product Page this Question was Asked From

Continue Researching