Will a Wiring Harness From a Tesla Model Y Also Fit a Model 3?

Question

Question:

Can i use 118831 in Tesla model 3

asked by: Wilfred Y

0

Expert Reply:

The Tekonsha harness you referenced, our part number TK56FR, is specific to the 2021 Tesla Model Y, so I cannot recommend it for your 2020 Model 3. With that being said, we do have an option available for your vehicle with the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT. Other than a wire that will need to run to a battery, this will require absolutely no cutting or splicing to install. This can be a bit of a difficult install though, so I included an install video we did on a 2018 Model 3 for you to check out.

expert reply by: Lazer S

0

Answer 1

For your 2018 Tesla Model 3 we have two Stealth hitch options. We have the part #391TES317 which comes with a lower hitch opening that can only be used with a hitch accessory like a bike rack and we also have the part #391TES317T which includes the…

view full answer...

Answer 2

You will only need one keel roller assembly, and I recommend the CE Smith - which is also made in the USA - because they come with a full assembly as opposed to having to piece together parts, which can be more costly. You only need to choose the one…

view full answer...

Answer 3

Yes. You can make connections to the battery on your 2020 Tesla Model Y in the same manner that you would on a standard, non-EV. You will need to start with a 4 way like the Tekonsha ZCI Kit #119250KIT which offers you a solution that doesn't…

view full answer...

Answer 4

I definitely have a recommendation for you to add both a trailer hitch receiver and wiring for your 2021 Tesla Model Y so you can haul your Wave Runner. The hitch I recommend is from Draw-Tite and the wiring harness from Tekonsha, with the correct…

view full answer...

Answer 5

We have several trailer hitch mounted enclosed cargo carriers that will be perfect for your Land Rover LR4. First, of you have a lot of things that you need to put in the carrier then the absolute best option is the Let's Go Aero GearSpace…

view full answer...

Answer 6

I pulled up pictures of the bottom of your Bass Pro Pond Prowler II and found that it basically has a flat hull with three ribs on the bottom. So what you want to do with the CE Smith Multi Sport Boat and Kayak Trailer #CE48810 is to lay the bunk…

view full answer...

Answer 7

I do have some installation assistance for you with a trailer wiring harness like the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness part #C59496 which is what I recommend for a Telsa Model S but we cannot comment on videos…

view full answer...

Answer 8

For starters, in order to use the CE Smith Self Centering Keel Roller for Boat Trailers part #CE29505 on your boat trailer you will also need to use the CE Smith Panel Bracket for 12" Boat Trailer Rollers part #CE10305G and the Roller Shaft with…

view full answer...

Answer 9

The bunk boards on the CE Smith Boat Trailer #CE48810 are actually adjustable so that it can accommodate a wide variety of boat styles. If you check out the picture I attached you can see that a similar boat (might even be the same boat) fits great…

view full answer...

Answer 10

The Sealed Oval Trailer Stop, Turn and Tail Light, item #ST70RB, uses an 1157 automotive style bulb with two filaments. The bright filament is rated at 21 watts and the dim filament is rated at 5 to 6 watts. With the filament wattage, we can…

view full answer...

Answer 11

One main difference between LED lights and incandescents is the amount of power each one draws. I did a little research and found that if you were to have LEDs and incandescents on the same circuit, it would be too much power draw for the LEDs…

view full answer...

Answer 12

LED lights draw considerably less amperage than incandescent lights. They also run much cooler. These 2 features are why LED lights last so long. The incandescent version of #STL8RB is #ST8RB and it draws 2.5 amps for the stop/turn signal functions…

view full answer...