Cross Bar Recommendation For 2018 Ford F-150 With Truckhero Elevate TS Rails

Question

Question:

I am looking for cross bars that will fit on the roof of my 2018 F-150 super crew cab and with the right fit kit could also be installed on the Truckhero Elevate TS rails I have on my truck bed. I appreciate your recommendations.

asked by: Scott B

0

Expert Reply:

For your Truckhero Elevate TS rails on your 2018 Ford F-150 I recommend the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5755. These crossbars are an excellent choice that have an on road capacity of 300lbs and an off-road capacity of 180lbs. Additionally, these bars can be adjusted anywhere from 19 to 30 inches to accommodate your load or gear carrying needs.

expert reply by: Bryce D

0

Answer 1

If you have the Truxedo TS Elevate rails that fit your 2022 Ford Maverick part #TH25FR the Yakima HD Overhaul Ladder Rack part #Y01151-5755 will fit it. We've confirmed this fit.

view full answer...

Answer 2

I recommend using the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover - 60" Crossbars #Y01151-5755, which has an 800-lbs static load limit and is compatible with the TS (T-Slot) Rails for Truck Hero Elevate Rack…

view full answer...

Answer 3

The TS (T-Slot) Rails for Truck Hero Elevate Rack Systems like part #TH75FR do not come with the actual ladder rack. This will need to be purchased separate and there are actually a few options for this. The Truck Hero Elevate Rack System which is…

view full answer...

Answer 4

Yes the Yakima Overhaul HD part #Y01151-5755 fits directly to the Truxedo Rail Kit part #TH75FR you referenced without any additional adapters.

view full answer...

Answer 5

The 60 inch crossbar version of the Yakima OverHaul HD #Y01151-57 is what Yakima recommends for your 2021 Ford F-150 with a 5-1/2 foot bed so there would be no concern with it fitting your truck. The adapter needed to fit it to the Retrax XR tonneau…

view full answer...

Answer 6

I spoke with my contact at Yakima who tells me that they have not tested the adapter kit included with the #Y01151-5755 OverHaul tonneau cover to see if the adapter was compatible with the accessory slots. After multiple attempts by both phone and…

view full answer...

Answer 7

Yes, the Tonneau Cover Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder Racks #Y01155 will indeed work with the TS Rails for TruXedo Elevate Rack System #TH75FR and TruXedo Lo Pro Soft Roll-up Tonneau Cover #TX571801 on your 2017…

view full answer...

Answer 8

The big functional difference between the UltraGroove #311-KRFA05A28 and JackRabbit #311-JEFA05A28 is that the JackRabbit is a flush design that doesn't add any height to the top of the bed rails and the UltraGroove is a low profile cover that…

view full answer...

Answer 9

I may have a solution for you but there is not a tonneau cover that is compatible with a Thule Xsporter Pro #TH500XTB since it uses the insides of the bed rails to mount instead of the tops of the rails. For a tonneau cover you might be able to use…

view full answer...

Answer 10

I've got a solution for you, but the Thule Xsporter Pro Truck Bed Ladder Rack #TH500XTB uses clamps to attach to the top and inside of your bed rails, so it is not compatible with the Trax Rails on the RetraxPRO XR #RTT-80373, compatible with…

view full answer...

Answer 11

To get the Yakima Overhaul rack, like #Y01151-57, installed with a tonneau cover, first you will need the Tonneau Cover Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder Racks #Y01155. The RetraxONE XR #RTX62GR will work very nicely…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...