Correct B&W Biker Bar Motorcycle Tie-Down System for a Harley Davidson Road Glide

Question

Question:

Will a 2302 work with a 2017 road glide?

asked by: Kevin

0

Expert Reply:

The correct B&W Biker Bar Motorcycle Tie-Down System for a Harley Davidson Road Glide is the part # BWMC2301.

expert reply by: Conner L

0

Answer 1

The correct B and W Biker Bar for the Harley Road King is the Touring model part #BWMC2301 that you referenced.

view full answer...

Answer 2

The Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System #BWMC2302B is the replacement bar that fits H-D Dyna, Softail, and V-Rod bike frames. The #BWMC2301B is the Replacement Clamping Bar for B&W Biker Bar Motorcycle Tie-Down for…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 5

To install the Small Coin Pattern Vinyl Flooring #TS97FR with the RV Flooring Adhesive #TS76FR you just need to make sure that your trailer floor is a bare wood so you have the best bonding of the adhesive as possible. Be sure to sweep it out really…

view full answer...

Answer 6

I have a solution for you, but there is not an adapter that will allow you to mount the B&W Biker Bar #BWMC2301 to an e-track setup on a trailer. The Biker Bar does come with mounting plates/anchors that are mounted on the underside of your…

view full answer...

Answer 7

The Ventline Exterior Wall Vent for RV Range Hood, #V2018-01 does not have a screen. The vent is 11-1/2" by 5-1/2" with a 10 bolt pattern. Please note the linked product review video. the holes are set in from the edge by about 1/2" to…

view full answer...

Answer 8

I spoke with our resident Harley guy about what he thought of the B&W Biker Bar Motorcycle Tie-Down System for Trailers #BWMC2301 if he were to use it with his bike. Since the bike frame is designed to support not only its own weight but also the…

view full answer...

Answer 9

Thanks for the pictures. The tag does help narrow it down. It appears you have a pair of 2,500 lb axles on your trailer. This means we are likely dealing with an axle with a straight spindle that uses an Inner and outer bearing L44643 (1" inner…

view full answer...

Correct B&W Biker Bar Motorcycle Tie-Down System for a Harley Davidson Road Glide

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching