How Many MORryde Scissor Jack Stabilizers Come with Part MR82AR

Question

Question:

If I were to purchase the MR82AR, would I need to purchase 2? 1 for the front stabelizers and 1 for the rear stabelizers?

asked by: Michael P

0

Expert Reply:

Yes, you would want to purchase 2 of the MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs # MR82AR if you're wanting to install on both sets of stabilizers on your 2021 Grand Design Imagine.

expert reply by: Erik B

0

Answer 1

The Jensen RV Stereo part #JWM40 is a great stereo for your RV that will allow you to play CD's, DVD's, and other devices connected through Bluetooth. That said, it is not BluRay compatible nor are any of the other RV stereos that I…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 7

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 8

We do carry the Dometic RV Water Heater #DMC74FR which you could use to replace your Atwood G6A-8E 6 gal RV Water Heater, but I highly recommend switching over to a tankless system like the Furrion RV Tankless Water Heater 60,000 BTU #FR98SR. This…

view full answer...

Answer 9

If your Ford F-450 has an actual bed and is not a cab and chassis model (with a service bed or flatbed) then you can use the Curt universal folding gooseneck ball rail kit #C61502. You could then use Curt hitch #C-52 or #C65500. A custom hitch for a…

view full answer...

Answer 10

Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.

view full answer...

Answer 11

Hey Dave, the MORryde upgraded shackle kit part #MR76ZR that you referenced is compatible with your 2020 Grand Design 2670MK and the Lippert Road Armor equalizers.

view full answer...

Answer 12

These are very similar products, the RV LP Gas Regulator, #37207-30395 is a dual stage regulator with auto changeover and rated at 345,000 Btu. The #37207-31525 is rated for 262,000 Btu. Each option has a 1/4" FIF inlet x 3/8" FPT outlet.…

view full answer...