Can etrailer Anti-Rattle Device # e99007 be Used with 500 lb Tongue Weight

Question

Question:

I was wonder if there was a weight limit on the stabilizer? The tongue weight limit on my hitch receiver is 500lbs, can I use it to stabilize something that will put about 400lbs of weight on it? Planning on installing it upside down to keep the weight on the hitch vs on the stabilizer.

asked by: P L

0

Expert Reply:

The etrailer Anti-Rattle Hitch Stabilizer # e99007 does not have a specified weight limit but it would easily handle 500 lbs of tongue weight like you mentioned.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Buddy, so the Fastway Adjustable Ball Mount part #DTSTBM6825-2S is a really great choice for the 2-1/2 inch hitch of your 2021 Ford F-250 which is going to be very solid in your hitch due to it's built in anti-rattle device that is easy…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You can expect the installation of the #C59236 in the 2023 Palisade video to be almost identical to your 2022 Hyundai Tucson. I'm not sure if the tail light style varies so removal may be a little different but the rest will be the same.

view full answer...

Answer 7

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 8

You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy Hitch…

view full answer...

Answer 9

To keep your back end from squatting, I recommend the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension item #CSS-1094R. These insert into your rear springs and keep your suspension from being pushed down by the weight of your…

view full answer...

Answer 10

I have a solution for you. You can't convert the Thule T2 Pro XTR 2 Bike Platform Rack #TH23JV to a 2 inch hitch according to my contact at Thule so you will need to use an adapter. I recommend using the Brophy Hitch Reducer 2" to…

view full answer...

Answer 11

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this hitch. I…

view full answer...

Answer 12

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Can etrailer Anti-Rattle Device # e99007 be Used with 500 lb Tongue Weight

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching