What Size Are The Mounting Bolts Included With The TorkLift StableLoad TLA7311S?

Question

Question:

What is the diameter of the mounting bolts/hole through the overload spring? My F-250 is predrilled .525 ID Thank you

asked by: Johnnie Y

0

Expert Reply:

The mounting bolts included with the TorkLift StableLoad # TLA7311S you were looking at are 7/16" in diameter so they will fit the .525" holes in the leaf springs of your 2007 Ford F-250.

Since you already have the holes, you do not need to do any drilling to get the kit installed.

I included an installation video of the # TLA7311S for you to take a look at.

expert reply by: Samuel C

0

Answer 1

We do - for your 2023 Ford F-350 you'll want the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TL89CR.

view full answer...

Answer 2

Yes, you will need to drill into the leaf springs on your 2022 Ford F-250 Super Duty whether you go with the standard TorkLift StableLoad #TLA7311 or the Stainless Steel version #TLA7311S. I checked with TorkLift and it looks like you'll need to…

view full answer...

Answer 3

Yes the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TLA7311S that you mentioned does come with the needed drill bit and guide to install the kit.

view full answer...

Answer 4

Yes, you can use the TorkLift StableLoad #TLA7310S on your 2021 Ford F-350 Tremor as long as you have a lower overload spring. If your overload springs already have the hole you will be able to bolt them directly to the spring. If you do not have the…

view full answer...

Answer 5

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 8

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 11

The SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA22 is listed to fit and install above the leaf springs on your 2019 Coachmen Leprechaun 319MB. I tried looking up a photo of the suspension on your motorhome but I could find…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

What Size Are The Mounting Bolts Included With The TorkLift StableLoad TLA7311S?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching