Morryde Pin Box for 2021 Jayco Eagle 336FBOK 5th wheel With Lippert 1621HD 5th Wheel Pin Box

Question

Question:

I have a 2021 Jayco Eagle 336fbok 5th wheel with a lci item number 814277 king pin with a serial number S005253246. It also says 119115 Dom 080320 with a max GVW 18000 lbs and max pin wt 3600 lbs and SAE J2638. I am trying to find the the Morryde king pin replacement and want to verify I am ordering the right one. Any chance you would know the right one to order? Thanks in advance

asked by: Richard G

0

Expert Reply:

It sounds like you have a Lippert 1621HD 5th Wheel Pin Box, 18,000 lbs, # LC1191151. The MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1621HD, # MR84VR will be the replacement you are looking for.

expert reply by: Michael R

0

Answer 1

Yes. The MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert 1621HD #MR84VR can be used to replace a Lippert 1621 or 1621HD; this pin box replacement is designed for trailers with GVWR up to 18,000-lbs so it is rated properly for…

view full answer...

Answer 2

There should be a sticker or plate on the pin box itself that lists the manufacturer and model of the pin box. If it is not present then there are some measurements you can take to determine the model of the pin box. I have included a link that…

view full answer...

Answer 3

Yes, MORryde cushioned pin boxes like #MR84VR can be used with Demco Hijacker Autoslide fifth wheel hitches. There's even a capture plate from MORryde that was designed for this application with the part #DM6025.

view full answer...

Answer 4

I reached out to my contact at Lippert who said that the serial number you gave me means you have one of the common 1621 pin boxes. If you are wanting to replace it directly then we do have a few options like the 18K part #LC1191151. For a pin box…

view full answer...

Answer 5

I have included some images with the dimensions of both the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY58GR and a 1621 Pin Box #LC1191151. Hopefully these images with measurements will help you find the measurement you are looking…

view full answer...

Answer 6

The MORryde Cushioned 5th Wheel Pin Box #MR84VR you were looking at has a total height of 11.35" (pictured below) so you wouldn't see much of a difference from the standard pin box you currently have. Based on what you've stated and the…

view full answer...

Answer 7

You are correct that Curt recently pulled the compatibility approval for Rota-Flex pin boxes with their branded 5th wheel hitches. In place of your Rota-Flex I recommend the MORryde Cushioned 5th Wheel Pin Box for 14K to 18K Trailers w/ Lippert…

view full answer...

Answer 8

MOryde's pin box cushioning wouldn't work with a rotating pin box like their You Turn line since the wear pads would constantly be engaging every time you went to make a turn and would delay the pin box from rotating since there would be…

view full answer...

Answer 9

We went ahead and looked up the information regarding your Kedu HY60D switch. For a compatible switch that will work, I recommend the Mini Momentary Switch - On/Off/On - DPDT #37213445. This particular switch has a cutout dimension of 0.745 inch tall…

view full answer...

Answer 10

While the specific Atwood switch you are in need of is no longer around since Atwood stopped offering it you can use the part #LG-145236 that you referenced as the switch setups are fairly universal in how they function.

view full answer...

Answer 11

The correct replacement landing gear switch for your trailer is the Lippert Ignition Proof 5th Wheel RV Landing Gear Switch part #LC145236, you'll just simply cut the wires from the old switch and attach the new one with butt connectors like part…

view full answer...

Answer 12

If you have been upkeeping with the care and maintenance on your 18K Demco Hijacker Autoslide #DM8550034 it sounds like you might need to mess with the gear adjustment bolt located on the cab-end of the Hijacker. To do this you need to place the…

view full answer...