Lost Keys For Rhino Rack Roof Rack

Question

Question:

I ordered and installed RRRLKVA on my car. I have now lost the keys. Is there any way I can get replacemenet keys?

asked by: Mark C

0

Expert Reply:

No big deal. There is a number on the locking core. All you need to do is get replacement keys for that specific number! This set is key number 062 # RRRK062-2. There are a bunch of other numbers on our site to chose from.

expert reply by: Adam E

0

Answer 1

I have a solution for you. First, though, you need to know that Rhino-Rack does not make just replacement keys. They are sold with their lock cores. To get your 062 key, you will need the Rhino-Rack Masterkey Lock Barrels, part #RRRK062-2. I…

view full answer...

Answer 2

Thanks for the picture of your roof rack feet. In it I can see that your lock core number is 062 which means the Rhino Rack Masterkey Lock Barrels #RRRK062-2 that you referenced comes with keys that would unlock what you have now as that is the…

view full answer...

Answer 3

Though I do have another solution for you, I spoke to Rhino Rack, but they do not carry the 290 key number, unfortunately. With that being said, I recommend replacing your current cores with Rhino-Rack Masterkey Lock Barrels #RRRK062-2 if you have…

view full answer...

Answer 4

We do offer Rhino Rack Masterkey Lock Barrel sets like the part #RRRK062-2 which is a pair lock cores and keys with lock number 062. What you can do is search our site for part number RRKXXX where the X's equal the key number you have and the…

view full answer...

Answer 5

If you do not have the key and can no longer unlock the lock cylinder on the Rhino Rack 2500 Series Legs #RRRLKVA, then you will want to drill out the center of the locks just enough to remove them. You can then install a new set of locks Rhino-Rack…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 12

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your canopy. Per…

view full answer...

Lost Keys For Rhino Rack Roof Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching