Replacement Hubs/Bearings for 2000 Kendon Folding Trailer With 1-1/16 Inch Diameter Spindle
Question:
I want to replace bearings,grease seals and hubs with grease seals on my 2000 Kendon fold-up trailer.Do you have all of the parts needed for this ?The trailer has 1 and 1/16 axels . thanks in advance
asked by: Donnie D
Helpful Expert Reply:
Your Kendon fold-up trailer has a 2K axle, given the 1.063 diameter spindle you referenced.
Assuming you have idler hubs, you'd need # 8-91-05UC1-EZ for a 4 on 4 bolt pattern or # AKIHUB-545-2-LF-2K for a 5 on 4-1/2 inch bolt pattern. The L44649 inner/outer bearings, L44610 races, 10-9 grease seal, dust caps for standard or EZ lube spindles and lug nuts are included. The hubs are pre-packed with grease and are 100% ready for installation.
If you were just needing the bearing/race/seal kit, you'd use the # BK1-150 kit you'd looked at. The kit also includes a tang washer and a cotter pin.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings
- Trailer Hubs and Drums
- Hub
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Kenda Karrier ST175/80R13 Radial Trailer Tire with 13" Black Mod Wheel - 5 on 4-1/2 - LR D
- Shop: Submersible, Under 80" Trailer Light Kit with 25' Wiring Harness
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Shop: Trailer Wiring
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Q&A: Radial Trailer Tire Recommendation for a 2012 Kendon Motorcycle Trailer with ST175/80D13 Tires
- Q&A: Installing E-Track to Metal Floor of Car Hauler
- Q&A: Can E-Tracks Attach to Trailer's Mesh Floor
- Q&A: Replacement Bearing and Seal Kit for 2004 Kendon Motorcycle Trailer
- Search Results: loading ramp
- Search Results: grease
- Search Results: bearing grease
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Search Results: 125255uc
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub - AKIHUB-545-2-LF-2K
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK1-150 Review
- Search Results: ptw83020
- Search Results: 125255uc seal
- Search Results: wheel bearing grease
- Q&A: Torque Specs for a 13 Inch Boat Trailer Wheel
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacing A 125255UC Double Lip Grease Seal
- Video: etrailer Camper Jack - Stabilizer Jack - TJ01RT Review
- Q&A: Can Old Grease Seals Be Reused When Changing Trailer Bearings
- Video: Bearing Repacking and Grease Seals Installation
- Shop: Trailer Hitch
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-EZ-2K Review