Does RAS Leaf Spring Enhancement RAS3611-SHD Fit A 2021 Ford F-250 4WD?

Question

Question:

Can a Roadmaster Spring assist from an 2018 F-150 4-wheel drive, part number RAS3611-SHD be used on a 2021 F-250 4-wheel drive truck?

asked by: Tom

0

Expert Reply:

The RoadActive Suspension Leaf Spring Enhancement Kit # RAS3611-SHD you mentioned will fit your new 2021 Ford F-250 Super Duty 4WD as long as it does NOT have the top overload springs.

If it does have the top over load springs you would need the # RAS3611-SLHD instead.

I included videos of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

The Timbren suspension enhancement #TFRTT350J is the easiest to install option to level your 2019 Ford F-250. This system is designed to be under a constant heavy load like what you have with your service body. The two springs work independently of…

view full answer...

Answer 2

For your 2021 Ford F-250 that you are wanting suspension enhancement for that improves traction, stability, is anti-sway, and reduces sag the best option hands-down is the RoadActive Suspension Kit part #RAS3611-SLHD. This option destroys the…

view full answer...

Answer 3

To answer your first question, yes the top overload spring on your 2019 Ford F-350 dually does need to be removed in order for you to install the RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS3611-SLHD, as you can see by the cut out of…

view full answer...

Answer 4

Air bags can be tedious so going with a kit you don't have to maintain on your 2015 Ford F-250 Super Duty is smart, and the best option to both help with the sag and sway you are experiencing is the RoadActive Suspension system. The correct fit…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

According to RoadActive Suspension the spring rate for the standard kit #RAS3611-S is 2,400 lbs. For the heavy duty #RAS3611-SHD it is 3,600 lbs. The heavy duty #RAS3611-SLHD is the same but only designed to fit if you have factory top overload…

view full answer...

Answer 10

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...