Do You Have a Replacement Female Wiring Receptacle for My Invisibrake Braking System?

Question

Question:

Just ordered a replacement male to male patch cord RM-450008 for my Invisibrake system. Now I realize the reason the existing cord was dragged down the road for a couple of hours is that the female receptacle on the toad is cracked and broken and that is why the patch cord came loose. Do you sell a replacement female receptacle I can splice onto the front of my car?

asked by: Eric K

0

Expert Reply:

If you need a replacement female receptable for your Roadmaster Invisibrake system, I recommend the Roadmaster 1-Way Female Connector # RM-450008-50.

expert reply by: Bob C

0

Answer 1

Yes, the Roadmaster Replacement LED Display Monitor #RM-300065-00 will work on your InvisiBrake System #RM-8700. This same part is used on both braking systems so it will be a direct replacement. The white wire from the LED is just for ground and the…

view full answer...

Answer 2

We don't have an installation video specific to the Roadmaster Replacement LED Display Monitor #RM-300065-00 but I have attached a video below of us installing the entire Roadmaster InvisiBrake System #RM-8700. You can skip ahead to around the…

view full answer...

Answer 3

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 6

Yes, all of the parts you mentioned are available separately through us. I have linked them below to see them all individually. #RM-452140 #RM-452141 #RM-452137 #RM-452136 #RM-452118 #RM-452116

view full answer...

Answer 7

I went out to the warehouse to measure the length of replacement patch cord #RM-450008 for you. The overall length is 78 inches.

view full answer...

Answer 8

I spoke with my contact at SMI regarding the vacuum line on your 2018 Jeep JL Wrangler, as it is indeed bit different than previous model Wranglers. He said that when installing the vacuum portion of the Stay-IN-Play Braking System #SM99251 you will…

view full answer...

Answer 9

I reached out to Lippert and my contact was able to confirm that the hub bore on you 176207 4,400 lb axle is 2" which means you can use the Replacement Dust Cap #DC200L-DCRP or get it in a 2-pack as part #RG04-040.

view full answer...

Answer 10

The Ford Edge went through a style change in 2011 and one of the changes involved the tail lights. The earlier generation Edge, including the 2008 models, used a combined wiring system. This means that the same bulb and circuit was used for the turn…

view full answer...

Answer 11

If your 2021 Ford Edge is an ST model, with the 2.7L Eco Boost engine it can be flat towed. Otherwise, it'll need to be trailered. For base plates, I'd recommend the Blue Ox #BX2677 base plate kit along with a #BX7380 Blue Ox Alpha tow bar.…

view full answer...

Do You Have a Replacement Female Wiring Receptacle for My Invisibrake Braking System?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching