Is There a Timbren Axle Less System that Has Lift Built into it for 3,500 lb Axle

Question

Question:

Is it possible to lift the trailer two to three inches using the timbren axeless suspension system?

asked by: Mike H

0

Expert Reply:

We have versions of the Timbren Axle Less systems like what you referenced for a 3,500 lb axle that have 4 inch lifts built into them like the # ASR3500S06.

expert reply by: Jameson C

0

Answer 1

When you say Timbren 3,500 setup I believe you are referring to the Timbren Axle-less system part #ASR3500S06. The mounting bracket is 4-3/4" wide. I have attached a couple of diagrams of the Timbren system for your reference.

view full answer...

Answer 2

The Timbren axle-less suspension kits are offered in either 4-on-4 or 5-on-4-1/2 bolt patterns; none is available with a 8-on-6-1/2 pattern idler hubs. All such kits are shown on the linked page. Several of these 3500-lb kits, parts #ASR3500S06,…

view full answer...

Answer 3

The only real difference between the Timbren Heavy-Duty Axle-Less Trailer Suspension with 4" Lift Spindle - 3,500 #ASR35HDS05 and the standard Timbren #ASR3500S06 is that the Heavy-Duty model features a larger spindle that would…

view full answer...

Answer 4

We actually have a version of the Timbren Axle Less kit for 3,500 lb axle replacements that has a 4 inch lift built into it with the part #ASR3500S06 which would work great for you. It does not have hubs or brake assemblies though so you'd…

view full answer...

Answer 5

The Timbren Axle-Less Trailer Suspension #ASR2KHDS09 you're looking at is actually not going to work with your trailer tires since this kit is only going to work with trailer wheels that are 16" or larger. So, instead I'd recommend going…

view full answer...

Answer 6

I assume this is a replacement axle, so in order to choose the correct one, you will need to know the dimensions of your current axle's hub-face to hub-face and spring center to spring center as in the diagram I have added, with A being the hub…

view full answer...

Answer 7

Based on your picture it looks like the left side is #30-92-004 and the right side would be #30-92-002. These lights are 8-9/16 inches across, 4-9/16 inches tall, and 2-1/8 inches deep. Just for reference on the wiring, since you can't always go…

view full answer...

Answer 8

The only trailer component that determines the speed rating of the trailer is the tires. All you have to do is simply replace your current tires with one that is rated for highway use, like the Kenda Loadstar #AM3S120 that you referenced, and you are…

view full answer...

Answer 9

There is a way to accomplish what you are needing to do. But the 7-way isn't going to play a role in charging your battery and doesn't care if the battery is lithium or not. The hot wire coming from your 7-way would only ever be enough to…

view full answer...

Answer 10

The best suspension to add is going to be an axle-less system from Timbren. These are universal fits and I highly recommend checking out the Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs #A35RS545E. This will give you a full…

view full answer...

Answer 11

The D in 205/75D15 represents that the tire has a bias ply construction whereas the R in 205/75R15 represents that the tire has a radial ply construction. The difference between a bias and radial ply is in regard to the directions of the cords. In…

view full answer...