What Roof Rack do You Recommend for My Camper Shell?

Question

Question:

looking for rack cross bars for my ARE camper shell MX series. yes will drill and mount, been looking, little confusing with all the choices. can you help narrow down which ones, thank you

asked by: Kirk R

1

Helpful Expert Reply:

For a great roof rack system that can mount onto your MX series camper shell, I recommend the Rhino-Rack Heavy-Duty Bar Roof Rack for Camper Shells # Y01-140B. This complete roof rack system comes with 2 RTC-style tracks with dual C-channels that provide adjustable mounting points for roof-rack legs. Another great feature of the Rhino-Rack Heavy-Duty Bar roof rack is that it comes with a 220 pound weight capacity. With that capacity, you will be able to transport a wide range of accessories and cargo on the crossbars. The tracks will require drilling in order to install onto your shell.

expert reply by: Bob C

1

Answer 1

There are roof racks available that you will be able to install on your Leer camper. There are no special mounting brackets needed, but you will need to install tracks that the roof rack feet will sit in, and the crossbars will then attach to the…

view full answer...

Answer 2

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 3

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your canopy. Per…

view full answer...

Answer 4

Thank you for the photo; and while it is very likely, I don't have the exact dimensions of the Leer Hi/Lo camper shell on your 2004 Chevy Silverado with an 8 foot bed in order to say with certainty if you can use the Rhino-Rack roof rack you…

view full answer...

Answer 5

I would be happy to help you. For the Yakima tracks on your Lance 815 Camper, I recommend the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars item #RRRLT600. Which crossbars you need will depend on how far apart your tracks are mounted and how…

view full answer...

Answer 6

To convert the factory 4-Way flat trailer connector on the back of your 2010 Ford F-150, you will need Adapter 4 Pole to 7 Pole and 4 Pole, #37185. You will plug the factory 4-Way into the back of the adapter and hardwire the remaining 4 wires. The…

view full answer...

Answer 7

The Rhino-Rack Aero Bar Roof Rack for Camper Shells part #Y02-480B is a great option for fiberglass truck bed campers as it was made for this exact purpose. It can support up to 220 lbs but bear in mind this rating is tested independently of the…

view full answer...

Answer 8

The Adapter 4-Pole to 7-Pole and 4-Pole #37185 is a universal part that will work on most vehicles and will require you to either run additional wiring for the charge line circuit, brake line and reverse light wires. These can either be new wiring…

view full answer...

Answer 9

I took a look at your order and it was the Rhino-Rack Roof Rack for Factory Tracks - 54" Bars #Y02-480B-NT which is too short for the 63 inch spacing on your truck. For that spacing you will need the following: - Rhino-Rack Roof Rack for Factory…

view full answer...

Answer 10

Yes, the 63" Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount part #RTC16 can be cut down to the size you need as long as you cut them perfectly straight to allow the end caps to go back on because at this time we do not carry them as a…

view full answer...

What Roof Rack do You Recommend for My Camper Shell?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching