Does Curt C13291 Class III Hitch Interfere With Backup Sensors on 2018 Jaguar F-Pace
Question:
I have the backup sensors, can I use this with my vehicle ?
asked by: Dennis W
Expert Reply:
According to my contact at Curt, their # C13291 Class III hitch will not interfere with the back up sensors on your 2018 Jaguar F-Pace. The backup sensors are installed into the rear bumper cover, and the hitch is actually installed behind the sensors, sandwiched in between the factory bumper beam and the vehicle, so there's no way for the hitch to interfere with the sensors. You can see this in the installation video I've linked for you.
If you'll be towing with the hitch, you'll need a few additional items to complete your towing system. For a trailer wiring harness, use part # 118785, a ball mount like # 2753 and # 19260 for a 1-7/8 inch or # 63845 for a 2 inch trailer ball.
You can see the install videos for the hitch and the wiring harness by using the provided links.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 900 lbs TW
- 6000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Roof Rack for a 2023 Nissan Rogue w/ Side Rails
- Q&A: Replacement Hub/Drum for Triton Axle 08353
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Will Curt Hitch Work With 2017 Jaguar F-Pace With Dual Exhaust on One Side?
- Article: Rooftop Cargo Carriers
- Q&A: Should Leaf Spring Capacity Match Trailer Weight or Axle Weight for Best Ride Comfort
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Replacement Bearing Kit and Bearing Buddy Grease Caps for 2012 Triton LT Trailer with Reliable Axle
- Q&A: Is Leaf Spring Capacity Rating for One Side or Two
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: How to Tie Down Skis and Snowboards to a Roof Rack
- Article: Roof Rack Information