Oil Bath Hub Bearing Kit For Barrett Trailer Wtih 3,500lb Axle
Question:
Vin # 1zeaavla25aXXXXXX. What bearing kit fits this trailer? Thanks
asked by: Tom
Expert Reply:
The Bearing Kit # BK2-100 is the one most likely to fit your Barrett trailer. You will want to confirm this is the correct kit by comparing it with your current bearings or measuring your spindle and hub. This will include a grease seal if you are planning to change to a greased hub.
Outer Bearing: # L44649 ID-1.063"
Outer Race: # L44610 OD-1.980"
Inner Bearing: # L68149 ID-1.378"
Inner Race: # L68111 OD-2.361"
Grease Seal: # RG06-050 ID-1.719", OD-2.565"
The Kodiak XL ProLube Kit # XLPROLUBE1980KIT contains inner oil seals for your 3,500lb axle as well as oil and oil bath caps for the hub. You can obtain the bearings and races separately with a Cotter Pin # 165649 to install the oil bath setup.
Products Referenced in This Question
Cotter Pin - 1/8" Thick x 1-3/4" Long
- Accessories and Parts
- Trailer Leaf Spring Suspension
- Cotter Pin
- ABS Fasteners
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Race for L68149 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.361 Inch O.D.
- Bearing L68149
- Race 68111
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Kodiak XL ProLube Kit for 3500-lb Axles
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 1.98 Inch
- Kodiak
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: Difference Between RG06-050 and Timken TMK58ZR Grease Seal
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Q&A: Replacement Grease Seals For TRP GS-1719DL