Do SumoSprings Maxim Helper Springs SSR-187-54-1 Fit a 2015 Thor Outlaw 37RB Motorhome?

Question

Question:

Will sumo spring ssr-187-54-1 fit my outlaw? The outlaw chassis has a extra 1/4inch plate welded to the frame rails where the upper bracket mounts. Would that cause a problem with the installation?

asked by: Pat C

1

Helpful Expert Reply:

The SuperSprings Maxim Custom Helper Springs - Rear Axle # SSR-187-54-1 you were looking at are indeed a confirmed fit for your 2015 Thor Outlaw 37RB even though there is a 1/4" thick plate welded to the frame rails, and include the correct mounting hardware to get them installed.

I included a video showing the # SSR-187-54-1 being installed on a similar 2020 Thor Outlaw Motorhome for you to take a look at.

expert reply by: Samuel C

1

Answer 1

The Timbren suspension enhancements you need for your 2023 Thor Outlaw motorhome include the Front Kit #TFFF53B and the Rear Kit #TFRF53A. These are a great way to replace/upgrade the OEM bumps stops as the OEM bump stops tend to be lacking in…

view full answer...

Answer 2

I reached out to my contact at Timbren and this is something that is not all that uncommon. If the brake lines on the axle of your 2013 F53 Chassis are underneath the Timbren Rear Suspension Enhancement #TFRF53A you can carefully bend them out of the…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 5

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Do SumoSprings Maxim Helper Springs SSR-187-54-1 Fit a 2015 Thor Outlaw 37RB Motorhome?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching