Will MaxxFan Roof Vent Cover part # MA00-933073 Fit Dometic FV4100 RV Roof Vent

Question

Question:

We have a 2021 Tiffin Open Road 34PA with Dometic FV4100 roof vent fans. Will the MA00-933073 which is a smoked MaxxAir II vent cover attach to the FV4100 using the supplied hardware from Maxxair? THX

asked by: Larry G

0

Expert Reply:

Yes the MaxxFan Roof Vent Cover part # MA00-955002 that you referenced does fit the Dometic FV4100 RV roof vent.

expert reply by: Jameson C

0

Answer 1

Covers like the Dometic Ultra Breeze Trailer Roof Vent Cover #DMC38FR you were looking at prevent vents from fully opening but come with a statement from the manufacturers that it's totally fine and that the vent still performs as it should…

view full answer...

Answer 2

The Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover part #DMC38FR is what I recommend for a Fan-Tastic Vent Roof Vent. It will allow the lid to be opened about 3/4 of the way which will be plenty for airflow especially if you have a model with…

view full answer...

Answer 3

The Replacement Quick Connect Valve without the plastic cover for the D&W Spray-away unit part #PF147005 is part #PF247008. The price is on the product page.

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 11

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Will MaxxFan Roof Vent Cover part # MA00-933073 Fit Dometic FV4100 RV Roof Vent

Product Page this Question was Asked From

Continue Researching