Determining Which Replacement Hub Fits Carry-On 5 x 8 Utility Trailer With 2000lb GVWR
Question:
I have a Carry-On Utility Trailer, 2,000 LB GVWR Model 5x8G 5 bolt and Im looking for a replacement set of hubs with bearings, races and seals. Will the Trailer Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Cast Item # T4084600042, work as a replacement? Thank you for your assistance,
asked by: Bruce M
Helpful Expert Reply:
Since your Carry-On 5' x 8' Utility Trailer has a 2000lb GVWR it more than likely has a 2000lb axle and would need a hub that uses either inner and outer bearings # L44643 or # L44649.
I know on The 5' x 8' Carry-On Trailer I bought last year it uses the # L44649, but you will want to confirm this before making a purchase.
To determine which bearings your hubs use you will need to remove one of the hubs and look for the bearing numbers stamped in the face of each bearing as shown in the included picture of the # L44649.
If you find your trailer uses inner and outer bearing # L44649 like mine then the Trailer Idler Hub Assembly for 2K E-Z Lube - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased # AKIHUB-545-2-EZ-2K.
If you find that your trailer uses the # L44643 instead then the # T4084600042 you were looking at would be correct.
I included videos of the products mentioned for you to take a look at.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Bearings for a Tractor Supply 5x8 Trailer with Dexter 8-258 Hubs
- Shop: Stabilizer Jack - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 1
- Shop: Stallion Stabilizer Jacks - 7" Drop Leg Travel - 22-1/4" - Qty 2
- Shop: Fulton Drop-Leg Stabilizer Jack with Mounting Channel - Weld-On - 20" Leg
- Shop: Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs - Qty 1
- Shop: Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4
- Video: Fulton Camper Jack - Stabilizer Jack - FSJL80300 Review
- Video: etrailer Camper Jack - Stabilizer Jack - SJ-R208 Review
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Search Results: 530 12 trailer tire
- Video: etrailer Trailer Idler Hub Assembly Installation
- Search Results: bt8 spindle
- Search Results: #84 hub
- Search Results: dexter 8 259
- Q&A: Increasing Wheel/Tire Size on Carry-On Utility Trailer
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Video: Kenda Tires and Wheels - Tire with Wheel - AM30660 Review
- Search Results: st145r12
- Video: Review of Dexter Trailer Hubs and Drums - Hub - 34822545BX
- Search Results: dexter 8 258
- Search Results: trailer jack
- Q&A: Do Trailer Axles Carry a Speed Rating
- Shop: Roof Rack
- Q&A: Can Trailer With ST145/R12 Tires be Upgraded to 13 Inch Tires
- Shop: Ladder Rack
- Q&A: How to Select Trailer Tires with Correct Load Range Rating for Trailer Gross Weight
- Q&A: Factors to Consider When Adding Larger Tires and Wheels to a Trailer
- Shop: Trailer Hitch
- Video: etrailer Trailer Idler Hub Assembly Review and Installation