Does Weight Distribution System Need Readjustment When Running Empty Dump Trailer
Question:
I tow a 12ft tandem dump trailer with my RAM .. will the difference between empty , 3000 lbs with TW of 500lbs and loaded 11,000- 12,000 lbs with TW of 1500lbs required constant readjusting of the weight bars on this WD Hitch ? or can I pull it empty at adjustment for full load.. sway is not an issue on this trailer but I pull loads 3-4 times in a day.. 25 miles
asked by: Joseph B
Expert Reply:
Because we don't offer a system that would cover a tongue weight range from 500-1500 lbs, I'd recommend choosing a system set up for when the trailer is fully loaded, as the empty tongue weight of the dump trailer isn't likely to cause much in the way of rear end sag on your truck.
The Curt # C17501 TruTrack you'd looked which is rated for up to 1500 lbs of tongue weight would be a good choice. When you're running the trailer empty, it won't hurt anything to leave the bars in place, and there will be no need to readjust things, but you might have a bit of a rough ride. You could always remove the bars when running empty if you wish.
I've linked to a product description video for the Curt # C17501 TruTrack weight distribution system.
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Suspension Enhancement
- Video: Curt True Course Trailer Sway Control Review
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 16,000 lbs GTW, 1,600 lbs TW
- Shop: Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle
- Search Results: f2609
- Search Results: 2609
- Video: Review of Equal-i-zer Weight Distribution Hitch - WD With Sway Control - EQ64FR
- Video: B&W Continuum Weight Distribution System Review
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Weight Distribution System Recommendation for 2016 Ford F-150 5.0 Towing 9000 lb Trailer
- Shop: Replacement Head for Equal-i-zer Weight Distribution Systems - 1,400 lbs TW
- Q&A: What is the Weight Rating for My Equal-i-zer Hitch Head
- Shop: Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,400 lbs TW
- Video: Review of Equal-i-zer Replacement Spring Bars For Weight Distribution Systems - EQ90-01-1499
- Video: Review of Equal-i-zer Weight Distribution Hitch - Replacement Head - EQ90-02-1400
- Shop: B&W Continuum Weight Distribution System w/ Sway Control for 2" Hitch - 16K GTW, 1.6K TW
- Search Results: 17501
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: weight distribution hitch
- Shop: Trailer Hitch
- Search Results: equalizer upgrade kit
- Video: Curt MV Weight Distribution System Review
- Q&A: Hitch Pin Weight Capacity and Sheer Strength
- Q&A: Welds are Cracking on 6-Year-Old Equal-I-zer Weight Distribution System
- Article: Determining Trailer Tongue Weight
- Article: Which Hitches are Made in the USA
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size