Troubleshooting Fan-Tastic Vent Roof Vent W/ 12v Fan Not Working With Remote

Question

Question:

I have 2 fans, one in kitchen, another in bedroom. Kitchen works with both remotes. Bedroom does not work. But can open manually and fan motor runs. Have tried programming, didn’t work. Any suggestions??? What’s left, lid motor or fan receiver????? I have a 2018 Arctic Fox fifth wheel Thank You

asked by: David G

1

Helpful Expert Reply:

Since the Fan-Tastic Vent Roof Vent W/ 12v fan in your bedroom is not working with either remote then you will need to replace the circuit board.

To determine which circuit board is correct you will need to know the model of the vent of you have. For example if you have the # FV807350 you were looking at then you will need the Fan-Tastic Vent Roof Vent Assembly Upgrade Kit - Clamp-on - Power Lift - 14-1/4"x14-1/4" # FV807357 which is the only way to get the correct circuit board. This comes with a whole new inner assembly and also a new remote.

If you have a different model vent just let me know.

I included a video of the products mentioned for you to take a look at.

expert reply by: Samuel C

1

Answer 1

I have attached for you below a list of troubleshooting steps for the Fan-Tastic Vent Roof Vents like part #FV807350 which will vary depending on what symptoms your roof vent is having and what particular model you have. The remote reprogramming…

view full answer...

Answer 2

The remote reprogramming process for a Fan-Tastic Vent Roof Vent like part #FV807350 states to hold both up and down arrow buttons down until all lights have flashed once. Unfortunately, it does not specify which set of arrows to press as it will…

view full answer...

Answer 3

This has come up before and when speaking with my contact at Fan-Tastic Vent regarding your model 6600 vent with the 417RF remote. She did confirm that the current model remote #FV9068-81 will not work with your vent model. The original remote for…

view full answer...

Answer 4

I am surprised you were not given a copy of the owner's manual for your Fan-Tastic Vent Roof Vent w/ 12V Fan and Remote #FV807350 by the installers. The accompanying diagram is from the manual and has all the functions of the remote control;…

view full answer...

Answer 5

If your older remote looks like what is in the picture I attached the part #FV9068-81 would work as a replacement according to Fan-Tastic Vents but you will need to program it. To program hold your remote 12 inches away from the fan while holding…

view full answer...

Answer 6

I may have a solution for you, but from what I was able to find out there is not a remote available for the model 7300 Fantastic Fans built before January 2014. Additionally, only certain fans would be able to have their motors run in both…

view full answer...

Answer 7

The 6600R does not have replacement parts, so a new unit is indeed necessary since the fan no longer works on the vent. So you do have a few options, depending on if you want a manual or powered lift, and if you want a remote for ease of use: -…

view full answer...

Answer 8

Have you tried reprogramming the remote? For programming a Fan-Tastic roof vent remote like part #FV9068-09 which is what your 7350 fan part #FV807350 uses what you need to do is hold your remote 12 inches away from the fan while holding both arrows.…

view full answer...

Answer 9

Yes, the rain sensor will reset once disabled but you will want to open and close the lid a few times in order to be sure everything has cleared. In order to disabled the rain sensor you will need to hold the up/down arrow on the remote part…

view full answer...

Answer 10

If the lift motor will no longer operate with the controller but does when you apply direct 12 volt power then that tells me there is an issues with the control board. The only way to replace the control board on the Fan-Tastic Vent Roof Vent part…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Troubleshooting Fan-Tastic Vent Roof Vent W/ 12v Fan Not Working With Remote

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching