Trouble Locating Tow Package Port On 2019 Honda CR-V AWD

Question

Question:

I purchased a Tekonsha T-One 118741 wiring harness for my 2019 CRV. When I opened up the side panel, there was no vehicle connector. I could not see a grounding screw either. I followed the wire loom with my fingers, feeling for a square bulge, and there is nothing between the junction and the tail light connections. Any suggestions on where the connector is? It is a 2019 CR-V 1.5 Turbo EX AWD model, manual lift gate.

asked by: Bud Z

0

Expert Reply:

The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118741 is a great option for a 2019 Honda CR-V AWD. It is a fit for all models as the factory tow package port will be present on all models. Unfortunately, the tow package port can be difficult to locate. It's actually up a little higher than normal behind the top panel. I have attached an install video for you below as well.

expert reply by: Conner L

0

Answer 1

All of the hitches we offer including the #e98840 won't be able to fit a 20 inch spare with the hitch installed. So you have a couple options. You could put the spare in the rear cargo area (you probably won't want to do that), you could keep…

view full answer...

Answer 2

Both the Draw-Tite #76128 and the Curt #C13397 Class III trailer hitch receivers do connect to the frame of your 2017 Honda CR-V in the same location. However, if you look at the photos I've attached, you can see that the cross tubes are not…

view full answer...

Answer 3

Thanks for the picture! That is definitely not the connector you are looking for. I have attached a picture below that will show you exactly where to look to find the connector. You are indeed looking for a white connector, but with a red tip. I have…

view full answer...

Answer 4

I recommend installing our etrailer Trailer Hitch Receiver #e98848 on your 2024 Honda CR-V Hybrid. I have included an installation video at the bottom of the page which shows the installation on a 2024 Hybrid we had in our shop. If you are needing a…

view full answer...

Answer 5

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 6

Yes, we do have a hitch that will fit your 2022 Honda CR-V Hybrid Touring. It is the EcoHitch Hidden Trailer Hitch Receiver item #306-X7345. This hitch is custom fit and bolts directly to your CR-V's frame with included hardware. If you look…

view full answer...

Answer 7

Functionally speaking, there isn't a huge difference. The Curt #C56382 has a slightly lower capacity at 3 amps for circuit for stop/turn signals and 6 amps for taillights. The Tekonsha #118781 has a capacity of 5 amps per stop/turn circuit and…

view full answer...

Answer 8

Fascia trimming is required to install the etrailer Trailer Hitch Receiver #e98848 on your 2024 Honda CR-V, but this is the case for all of the hitches that fit your vehicle. According to the instructions you'll be cutting out a notch that is…

view full answer...

Answer 9

The etrailer class 3 hitch #e98848 will affect the hands free lift gate sensor on a 2024 Honda CR-V. It is difficult to give a firm answer to this question, as we have received varying reports on the functionality of the sensor with the hitch…

view full answer...

Trouble Locating Tow Package Port On 2019 Honda CR-V AWD

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching