Do These Carr Custom-Fit Side Steps Fit My 1997 Ford F-250 Heavy DutyTruck

Question

Question:

Just doing some research on these and when I go to the CARR website it does not say this would be a fitment for my 1997 Ford f250 HD. When I lock at the super hoop, the mounting looks similar just without the flat plate that would go from the bottom of the door jam. Thank you.

asked by: Ken M

1

Helpful Expert Reply:

This item only works the the 1997 Ford F-250 light duty models, not heavy duty, so our website was incorrect. Your option will be the Carr Custom-Fit Side Steps - Super Hoop - Black Powder Coated Aluminum - 17" Step - 1 Pair, part # CARR120251. The come with non-slip diamond tread and they are made in America.

I have included a product description link below.

expert reply by: Mark Smith

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Appreciate the purchase of the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. And as far as the trickle charge, the InvisiBrake does provide up to a 2 amp charge on your battery if the running lights are on, so if the running lights are…

view full answer...

Answer 6

You have come to the right place to find side steps for your 1994 Ford F-350 with a 6" lift and I highly recommend the Carr Custom-Fit Side Steps because they offer you the best footing with their tread pattern and have a significant drop to…

view full answer...

Answer 7

I have a solution for you. When the Bully Black Bull Adjustable Side Steps - Aluminum w/ Matte Black Powder Coat - 9" Step - 1 Pair #BBS-1101S-2 says "Not Confirmed," it means that either the dimensions of the step or the hardware that…

view full answer...

Answer 8

I spoke with someone from Buyers Products about your issue. They suggested that running the Ultra Bright LED Flood Light - 9,000 Lumens - Black Aluminum - Clear Lens - 12V/24V, part #3371492196, to your battery will solve your problem. There is not…

view full answer...

Answer 9

Usually you will find the LINC remote control receiver in the same compartment as your generator. On the receiver is a momentary push button you will press to sync the remote. After you press and hold this button on the receiver you will press the…

view full answer...

Answer 10

I sure can! The Lippert 1716 Pin Box #LC1324791 you were looking at measures 36.4" long and 14" tall as shown in the included diagram provided by Lippert.

view full answer...

Answer 11

The measurements for the Lippert 1716 5th Wheel Pin Box - 15,500lbs #LC1324791 are as follows: 3A: 20-3/8" 3B: 29-1/8"

view full answer...

Do These Carr Custom-Fit Side Steps Fit My 1997 Ford F-250 Heavy DutyTruck

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching