Replacement Bracket/Hardware Kit for Westin 28-51040 R5 Nerf Bars

Question

Question:

Looking for 28-51040pk

asked by: Tom

0

Expert Reply:

You're looking for replacement hardware for the Westin # 28-51040 R5 Nerf bars, is that correct?

If so, the replacement hardware/bracket kit is part # 28-5104PK that you'd looked at. The # 28-51040 R5 nerf bars are a fit for 2009-2018 Ram 1500 Quad Cab and the 2019-2021 Ram 1500 Classic Quad Cab.

expert reply by: Mike L

0

Answer 1

The correct replacement bracket and hardware kit for the Westin R5 Nerf Bars part #W73FQ (28-51265) is the Replacement Mounting Hardware Kit for Westin R5 5" Nerf Bars part #28-5127PK. Please note, the Westin R5 Nerf Bars fits the…

view full answer...

Answer 2

I have checked with Westin Automotive, and have found that the #28-5103PK replacement hardware/bracket kit for the Westin R5 Nerf Bars #28-51030 does indeed include the adapter plates you speak of, as shown in the provided diagram. I've…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 6

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Replacement Bracket/Hardware Kit for Westin 28-51040 R5 Nerf Bars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching