Suspension Helper Recommendation for a 2019 Subaru Crosstrek

Question

Question:

Im looking for some sort of suspension helper. Can be air spring or composite. I imagine something on your site would work but you have nothing listed specifically for my car. Let me know what options I have. Thanks!

asked by: Jack

0

Expert Reply:

The only suspension enhancement option we offer for a 2019 Subaru Crosstrek is the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension part # CSS-1125. The SumoSprings install between the coils on the coil springs and prevent them from compressing when loaded. They are easy to install and can be removed when not in use. They will do a great job of providing support while towing or hauling heavy loads.

expert reply by: Conner L

0

Answer 1

A weight distribution system does not increase a hitch's tongue weight capacity. Rather, it takes weight off of the tongue, helping loads stay stable and level. In other words, if you use a trailer without a weight distribution system with a…

view full answer...

Answer 2

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 3

If you can provide me with some measurements of your coil springs, I can determine if any of our SuperSprings Coil Inserts will work on your 2009 Subaru Legacy. Unfortunately SuperSprings has not tested any of their coil inserts with your vehicle,…

view full answer...

Answer 4

Yes, the SumoSprings part #CSS-1125R that you referenced are a confirmed fit for your 2016 Subaru Outback Wagon and would eliminate the sag you are experiencing when towing as that's exactly what they are designed to do.

view full answer...

Answer 5

Thank you for providing a photo of your trailer coupler. Trailers should always be level when hitched. If a trailer is out of level when towed it will tend to have more sway. I notice you have weight distribution (WD) lift brackets on your trailer…

view full answer...

Answer 6

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 11

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

Answer 12

A 4-way trailer connector will have four functions which means it will also have four wires for the exception of wishbone harnesses. These four functions are ground, tail light, right turn, and left turn. The ground function will usually be…

view full answer...

Suspension Helper Recommendation for a 2019 Subaru Crosstrek

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching