What Tonneau Covers and Ladder Racks Are Compatible on a 2020 Ford F-150 Super Cab 5'7" Bed?

Question

Question:

Hello, Can you tell me which Tonneau Covers and Ladder Racks are compatible on a 2020 Ford F-150 Super Cab? Bed length is 5’7”.

asked by: Stephen H

0

Expert Reply:

There are a few different options for tonneau covers that will fit ladder racks on your 2020 Ford F-150 Super Cab (5'7" bed). For a soft, economic cover, I recommend the Access TonnoSport Soft, Roll-Up Tonneau Cover # A22010369. The TonnoSport cover involves a clamp-on installation and is the most affordable access roll-up cover. For a mid-range hard cover that will fit a ladder rack, I recommend the Lomax Hard Tonneau Cover - Folding - Aluminum - Matte Black # AB1010019. The Lomax Hard Cover comes in the tri-fold style and the panels can be easily removed for bed access. For all the bells and whistles, I recommend the Pace Edwards Bedlocker Retractable Hard Tonneau Cover w/ Explorer Series Rails - Electric - Aluminum # 311-BEFA05A28. The Bedlocker comes with a remote-operated electric cover that has electro-magnetic brake that stops and locks cover at any point along the rails.

As far as ladder racks, I recommend the Adarac Custom Truck Bed Ladder Rack - Steel with Aluminum Crossbars - 500 lbs # A70490 to use with the TonnoSport cover and the Lomax Hard Tonneau Cover. The Adarac Ladder Rack fits on top of your trucks rails and installs directly into the truck's stake pockets. In addition, the square bars with integrated channels make it For a ladder rack to use with the Pace Edwards Bedlocker, I recomemend the Pace Edwards Utility Rig Rack Truck Bed Ladder Rack - Aluminum # 311-UR3014. The Utility Rig is a premium ladder rack that is has aluminum crossbars and stainless steel fasteners.

For all of your securing needs on all of these ladder rack options, I recommend the Erickson Re-Tractable Ratchet Straps w/ Push Button Releases - 1" x 6' - 500 lbs - Qty 4 # EM34420. The push-button retractable system on the straps helps you avoid any unnecessary frustration when trying to gather up the straps after use.

expert reply by: Bob C

0

Answer 1

In order to mount a set of cross bars onto a Pace Edwards Hard Tonneau Cover you would need to use the BedLocker part #311-BEFA05A28, the JackRabbit part #311-JEFA05A28, or the Full-Metal part #311-FEFA05A28 because these are the only options that…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 5

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Thanks for reaching out, Roy! The tie-down rails you see in the discussion video for your 2023 Ford F-150 Lomax Stance Hard Tonneau Cover #LOM76DR isn't something that we carry and it doesn't look like Lomax has them either, but we do have…

view full answer...

Answer 10

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 11

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 12

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...