Will Thule Motion XT Rooftop Cargo Box Fit Prinsu Roof Rack On 2011 Subaru Outback?

Question

Question:

Hello, would I be able to mount this cargo box directly to a Prinsu roof rack? Thanks

asked by: Lito M

0

Expert Reply:

I did some research and it looks like the Prinsu roof rack for your 2011 Subaru Outback has crossbars that are 1" tall and 2" wide. This will be able to accommodate the Thule Motion XT Rooftop Cargo Box - 16 cu ft - Titan Glossy
Item # TH629707 since it fits crossbars that are no taller than 1-11/16" and no wider than 3-1/2". I attached a demonstration video for you to check out regarding this roof box.

expert reply by: Andrew N

0

Answer 1

Yes. I was able to do a bit of research and find out that the crossbars on the Prinsu Designs Cab Rack are 2" wide x 1" tall. Because of these dimensions, the clamps on the Thule Pulse Large Rooftop Cargo Carrier #TH615 will fit on these…

view full answer...

Answer 2

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 6

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 7

Yes, the Thule Motion XT Rooftop Cargo Box part #TH629906 will work just fine with Volkswagen/VW factory crossbars.

view full answer...

Answer 8

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 9

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 10

Hey Brian, the Truxedo Elevate Ladder Rack part #TX46NV that you referenced is compatible with your Thule roof cargo box but you will also need the T-slot adapter part #TH27PQ which adapts the hardware to fit directly to the slot on top of the load…

view full answer...

Answer 11

If you are using the Rhino-Rack Aero Bar Crossbars like #RRVA137B they have a dimension of 54" long x 3-1/8" wide x 1-3/16" tall which works for Thule boxes that use the PowerClick quick-release clamps, including the Thule Vector…

view full answer...

Answer 12

Both the Rhino-Rack Vortex Aero and Thule WingBar roof rack systems have very nice features and would work well for your 2014 Hyundai Santa Fe. Both systems are designed to work on vehicles that have the flush mounted rail system. As far as the…

view full answer...

Will Thule Motion XT Rooftop Cargo Box Fit Prinsu Roof Rack On 2011 Subaru Outback?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching