bing tracking image
Q & A Icon

Troubleshooting A Furrion Vision S Monitor Not Powering On  

Question:

Camera hooked up to back of trailer from factory blue light on ! All good Monitor not coming in ! Took power plug apart checked fuse good stretched spring a tad plugged in monitor came on camera working good!! Unplugged tried again nope want come on can it be power plug?? Checked power source in truck works with other chargers so that’s not the problem. Thanks

1

Helpful Expert Reply:

Since you've already check the power in the 12v outlet in your truck and it was good the issue has to lie with the plug or the fuse inside the plug. You can start by replacing the 2 amp 125v slow blow fuse with a new one from your local hardware store. If replacing the fuse doesn't work the wires inside the power cable may have an brake somewhere internally. You can replace the cable with the Replacement Furrion Monitor Power Cable Item # C-FOS07TAPK-006.

If none of this works the monitor on your Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF may be bad and need to be replaced with the Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System Item # FR77FR.

If you get all powered up and experience any issues with signal strength the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera Item # FR87PR or the PWM Filter # VGR64VR will boost power to the camera to increase the signal.

expert reply by:
1
Kevin C

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>