Is Lippert Trailer Hub and Drum Assembly 814200 The Same As The Dexter 84546UC3-EZ?
Question:
COACHMEN Clipper 1285SST Hub, I was wondering the compatability of parts...... I know it is suggested to get aDexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10inch Diameter - 5 on 4-1/2 Item # 84546UC3-EZ. Would a Lippert 10inch Brake Hub Assembly, 5 on 4.5 1/2inch Stud - 3,500 lbs. 814200
asked by: David
Expert Reply:
The Lippert 10" Brake Hub and Drum assembly 814200 you mentioned would work just fine on a 3500lb axle as it uses the common 3500lb bearing combination of # L68149 and # L44649 but we do not carry that hub.
Instead I recommend the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3-EZ you mentioned as it has the same bearing combination, and will fit perfectly on your 3500lb axle.
I included a video of the # 84546UC3-EZ for you to take a look at.
Products Referenced in This Question
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Brake Controller
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Trailer Wiring
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Search Results: 8~247
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Search Results: tekonsha
- Search Results: 008~247~05
- Search Results: c15410
- Search Results: 814200
- Search Results: spindle nut retainer
- Shop: Trailer Hitch
- Shop: Fluid Filters
- Article: Testing Breakaway Systems
- Q&A: Recommended Battery Size for Breakaway Brake System
- Search Results: 324~000111
- Q&A: Will Dexter Brake Assemblies Fit on a Lippert Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Q&A: Will a Dexter Trailer Hub Fit on a Lippert Trailer Axle
- Q&A: ST Rated Tire Recommendation for a 6x12 Enclosed Trailer
- Shop: RV Interior Lighting
- Q&A: How To Tell If I Have An EZ Lube Axle
- Q&A: How Do I Wire A 2 Wire Light In Place Of A Single Wire Light On My Camper?
- Q&A: Can Power Wire of the Rectangular LED Trailer Clearance Light be Routed Through Angled Base Hole
on Trailer Brakes
